Hi guys! Today I clean up yesterday's last piece for the piston. So here are updates on Project Devil Gundam! Cleaning Up I start with the top of the piston using file then sanding stick. As you can see

Hi guys! Today I finish the last batch for the scratch build piston (hopefully). So here are updates on Project Devil Gundam! Last batch Same routine as the previous one. Mark, drill a hole then trim.

Hi guys! Today I will clean up the piston I made yesterday and do a few checks on them. So here are updates on Project Devil Gundam! Clean up and test fit First using the same drill bit size I file the

Hi guys! Today I will make a few more rings before cementing them all together forming a piston. So here are updates on Project Devil Gundam! Cementing process I start with a few more rings before cementing

Hi guys! Today is going to be grinding on making these rings. So here are updates on Project Devil Gundam! Even more rings! This process takes longer because I have to prep the piston twice. First when

Hi guys! Today I will show you how the actual process of making the rings from a pla plate. So here are updates on Project Devil Gundam! Trimming rings from pla strip I've trimmed pla plate into a strip

Hi guys! Today I will working another batch of rings then cement them together into a piston. So here are updates on Project Devil Gundam! New batch of rings Since the previous batch was a success. Now

Hi guys! Today is the moment of truth for my piston I've been building the past few weeks. And it turned out as I expected! So here are updates on Project Devil Gundam! After leaving the cement overnight

Hi guys! Today I will make another batch of rings and doing prep work on every single one of them before moving into cementing process. So here are updates on Project Devil Gundam! Rinse and repeat The

Hi guys! Today I will try another method on making this piston since the previous one didn't go so well. After the cement has cured I tried filing down the piston into shape. But since the marking are

Hi guys! Today I will continue my new piston building with the new method. I really do hope this one will work. So here are updates on Project Devil Gundam! Even more copies As I haven't decide the actually

Hi guys! Today I will redesign the piston and start with a prototype for the legs. So here are updates on Project Devil Gundam! Bigger rods smaller piston The new piston will be using bigger rods since

Hi guys! Today I will continue making the piston with the second method. So here are updates on Project Devil Gundam! Rinse and repeat This is the part where I grind on making this piston by doing the

Hi guys! Today I will try a different method for making this piston since the copies I made yesterday weren't properly align. I will explain as best as I can bellow. So here are updates on Project Devil

Hi guys! Today I will try a different method for making this piston since the copies I made yesterday weren't properly align. I will explain as best as I can bellow. So here are updates on Project Devil

Hi guys! Today I will continue on making a piston for the back articulation of the leg. So here are updates on Project Devil Gundam! Making copies Since I want the piston to be at least 15 mm, I would

Hi guys! Today I will start making a piston for the back articulation of the leg. So here are updates on Project Devil Gundam! Ideas and sketches For scratch building I always start with a sketch. And

Hi guys! Today I will do a small clean up then a few test fits between the thigh and waist. So here are updates on Project Devil Gundam! Small clean up Now that the cement has cured overnight, I can clean

Hi guys! Today I will start with small check on the thigh I cement yesterday. Then start making the other thigh through the same steps. So here are updates on Project Devil Gundam! Checking yesterdays

Hi guys! Today I will start building the thigh based on the connector I finished yesterday. So here are updates on Project Devil Gundam! Manually drilled hole I've drilled the hole manually and cleaned