#rebar

Its been really hot early summer temperatures hitting close to 40 Celsius. Last week was a bit easier so I decided to kick it off again. Before the summer we basically just dug a hole. The hole was dug

We are a couple of days from the main concrete pour of the project, the floor onto which both metal structures will stand. Most rebars above the wooden formwork are now in place. Another set of

The formwork for the concrete slab on top of the workshop is up. Today's crew is tying down metal rebar for the beams that will support the slab The whole rebar system is hand made. The last step of the

Rebars on steps of the outside corridor leading to the workshop. Detail of double layer of rebar for the concrete of a workshop wall Weaving rebars together into a metal vail Metal rebar from the slab

The white line that frames the bedroom is a 3cm x 3cm metal square tubing that will help create the 3cm step to stop rain water from going inside. It will be removed once the concrete is cured. Metal base

The four bolts that will receive the base plate which is at the bottom of each metal column are welded in place. This is part of the delicate alignment that was mentioned in earlier posts. Another layer

Today's crew is specialized in metal assembly for reinforced concrete. Metal for the beams under the bedroom and the terrace are in place. The bedroom pentagon is now clearly visible. Beams connect at

Beam and slab rebar installation for kid pool.

ការដំឡើងដែកសសរដែលមានប្រវែង៥,១៤ម

Today rebar installation of column from 14F to 15F that has the length over 5m.

ការងារចងដែកធ្នឹម

នេះគឺជាប្រភេទដែកដែលបានបង្ហាញក្នុងការតាំងពិព៌ណមួយនៅកោះពេជ្រក្នុងរាជធានីភ្នំពេញ។

Work has been absoloutely crazy around these parts lately. The entire City is under construction it seems. The other day, we were getting ready to pour a concrete slab (that's built like a tank) for a

Gensco Electric Rebar Cutting Tool - #8 capacity - 1"

EVERY DAMN DAY