#violinmaking

지난 포스팅에서 앞판과 뒷판의 바깥면을 우여곡절 끝에 마무리 했는데요, 오늘은 그 단계가 끝나기 무섭게 다시 곡선을 잡게 됐어요. 바로 각 판의 안쪽 인데요, 사실 바깥면보다 안쪽면이 더 까다롭다면 까다로울 수 있겠어요. 각 부분별로 두께가 어느정도씩 정해져 있는데 만약 그것보다 더 깍아버리게 된다면 얇아지거나 정말 심하다면 판에 구멍이 나버리는 수도 있겠죠....?

아무래도 완벽하지않는 영어보단 한글로만 쓰는게 낫겠다 싶어 앞으론 한글로만 포스팅 하도록 하겠습니다!! ㅎㅎ 자 그럼 지난 포스팅에 이어 다음 단계는 앞판과 뒷판의 세밀한 곡선을 마무리 짓는것인데요, 이게 현악기 제작에 있어 가장 어려운 부분이면서도 가장 재밌는 부분이 아닌가 싶어요. 지난번 단계에서 테두리선을 삽입 했으니 이제 아주 작은 손가락대패라 불리는

Today’s step is purfling. The black line of the violin rim is purfling. Purfling is not painted, but rather digging a groove the plate and planting the material. Ebony wood is used for the material. Then

In the last post we have put the two plates together. The next step is to make a curve. By attaching the two plates, the underside becomes bumpy again. So plan to flatten it again. Then draw it to fit

Today’s step is Belly and Back boards making. At first belly’s wood is spruce and back is maple. Although there is a single board, but usually two boards are used in one unit. First plan each plate flat

Today I want to post about my dream school. It isn’t highschool or Univ. but jobschool. Name is ‘Mittenwald Instrumentenbauschule’ in Mittenwald Germany. Twelve candidates are selected through the entrance

Today I’m gonna post next step from the last posting. It is rib. Violin rib (side plate). The type of wood is ‘Maple’. It is just 1.2mm thick and i need to bend it on 180degree iron. After bending, glue

Hello, today I’m going to post about the first step of violinmaking. If you have a formplate already, it could be first step. Every building has each columns. Violin is a kind of building(house), so it

Finally I can start Steemit!!! From now let me post about my job and hobby(Photography). I’ll post in two languages English and Korean, because actually I’m Korean. But my English is not that good, so