✨¡Buenas tardes, amigos de holozing!✨ Como siempre, contenta de pasarme nuevamente por acá a compartirles una bonita idea de dulcero, inspirada en Tiderox. Hasta ahora no había elaborado nada sobre criaturas de tipo dragón. La verdad es que pensaba que sería muy difícil elaborar algo de dragones, pero me decidí primero por el que era más sencillo y bueno… no fue tan sencillo, pues tiene muchas piezas y detallitos que debían encajar a la perfección. Sin embargo, creo que hice un buen trabajo para ser la primera vez.
🔸Sin más que añadir, a continuación los dejo con el paso a paso:
✨Good afternoon, holozing friends!✨ As always, I'm happy to stop by here again to share a nice candy idea, inspired by Tiderox. Until now I hadn't made anything about dragon-type creatures. The truth is that I thought it would be very difficult to make something about dragons, but I decided first on the simplest one and well... it wasn't that simple, because it has many pieces and little details that had to fit together perfectly. However, I think I did a good job for my first time.
🔸Without more to add, then I leave you with the step by step:
♥️ESPERO QUE TE GUSTE,
¡Empecemos!
♥️I HOPE YOU LIKE IT,
Let's start!
✂️ MATERIALES | ✂️ MATERIALS
- Botella de refresco.
- Foami escarchado azul.
- Foami escarchado rosa.
- Foami escarchado dorado.
- Foami morado.
- Foami azul.
- Pinturas y marcadores.
- Pegamento.
- Hoja blanca.
- Tijeras.
- Lápiz.
- Soda bottle.
- Blue frosted foam.
- Pink frosted foam.
- Gold frosted foam.
- Purple foam.
- Blue foam.
- Paints and markers.
- Glue.
- White paper.
- Scissors.
- Pencil.
✨ PROCEDIMIENTO | ✨ PROCESS
✨ PASO 1:
Lo primero que hice fue tomar la botella de gaseosa y recortar la parte superior de la misma, justo por donde inicia el área de la etiqueta. Al estar derecho, recorté en foami escarchado azul una tira de 20 cm x 1 cm, para el borde inferior de la pieza de la botella, otra más gruesa de 9 cm x 2.3 cm para los laterales de la tapa y un círculo de 3 cm de circunferencia para la parte superior de la tapa.
✨ STEP 1:
The first thing I did was take the soda bottle and cut off the top of it, right where the label area starts. Once it was upright, I cut out a 20cm x 1cm strip of blue frosted foam for the bottom edge of the bottle piece, a thicker strip of 9cm x 2.3cm for the sides of the lid, and a 3cm circle for the top of the lid.
✨ PASO 2:
Seguidamente, recorté un cilindro de 12 cm con bordes ovalados, parecido a una flor. Tomé pintura, difuminé los bordes y recorté en medio una cruz por donde se meterán las golosinas. Además, recorté un cilindro liso en foami escarchado dorado de 12.5 cm, recorté la cruz en medio, uní ambas piezas y pinté puntos blancos en el foami con bordes ovalados. Al estar seco, pegué encima la pieza de la botella.
✨ STEP 2:
Next, I cut out a 12cm cylinder with oval edges, resembling a flower. I took paint, blurred the edges, and cut out a cross in the middle where the candy will go in. I also cut out a smooth 12.5cm cylinder of gold frosted foam, cut out the cross in the middle, joined both pieces, and painted white dots on the foam with oval edges. Once it was dry, I glued the bottle piece on top.
✨ PASO 3:
Ahora es momento de elaborar a Tiderox. Dibujé a la criatura en una hoja blanca y, seguidamente, transferí las piezas a los colores correspondientes de foami como explico a continuación: cuerpo en foami azul, cola y pieza de la cara en foami morado y cuernitos en foami escarchado rosa.
✨ STEP 3:
Now it's time to make Tiderox. I drew the creature on a white sheet of paper and then transferred the pieces to the corresponding colors of foam as explained below: body in blue foam, tail and face piece in purple foam and horns in pink frosted foam.
✨ PASO 4:
Al estar todas las piezas listas, comencé a dar color con pinturas a los bordes de las piezas en foami liso. Al estar seco, tomé marcadores y di detalles más precisos al cuerpo, a las aletas, cola y rostro. En cuanto al ojo, lo que hice fue dibujarlo en hoja blanca, pintarlo, recortarlo y pegarlo al rostro. Pegué todas las piezas hasta formar a Tiderox y dejé secar.
✨ STEP 4:
Once all the pieces were ready, I began to paint the edges of the pieces in smooth foam with paints. Once it was dry, I took markers and gave more precise details to the body, fins, tail and face. As for the eye, what I did was draw it on a white sheet of paper, paint it, cut it out and glue it to the face. I glued all the pieces together until I formed Tiderox and let it dry.
✨ PASO 5:
Al estar listo, pegué a la criatura en la parte superior del dulcero, recorté un par de estrellas de mar en foami escarchado rosa y pegué debajo de Tiderox, justo en la zona media del dulcero.
✨ STEP 5:
Once it was ready, I glued the creature to the top of the candy dish, cut out a couple of starfish in pink frosted foam and glued them under Tiderox, right in the middle of the candy dish.
❤️ Hasta la próxima publicación.
❤️ Until the next post.
!TE DESEO UN GRAN DÏA¡
Todas las fotografías son de mi propiedad.
Separador y Fotos editadas en Canva
!I WISH YOU A GOOD DAY
All photographs are my property.
Photos edited in Canva