Hey dear Hivians as Halloween is approaching and everyone will be going out wearing spooky stuff, For that i have just a perfect DIY project to do. So today we are making a crystal spider pin. This pin will be just an accessory if you are going out in a simple dres just some of these can add that Halloween spirit to your dress.
The materials we need are
Materials:
•4 wire pieces cut into 4 inch parts
•a 10 mm pearl
•a 8 mm glass crystal bead
• some 2mm pearls
•some silver glass pipe beads
• a head pin
• a pin base
Process:
now we take the head pin and insert the crystal glass bead first .
then we take the 4 wire pieces and loop that twice arround the head pin as shown in the picture make sure its done tightly and is secured.
Now we insert the 10mm pearl bead and make a loop at the end of the pearl bead Now our spider base is ready.
so the wire pieces are 2 inch on each side making these 8 spider legs. These wires will be filled with beads so the spider legs look pretty and bendable.
As you can see here are some zoomed pictures of the spider base now in each wire we will insert 2 pipe beads.
Then we put a 2mm pearl bead then a 4 mm pearl then again 2 mm pearl , 2 pipe beads, a 2mm pearl and then we make a loop add the end so the beads dont fall off.
just like in the picture.
here is the map of beading instructions.
--•o•--•-•
like this we make all the legs for the spider up.
now the legs will be bent from the pearls in this manner and we make them twist downwards so the spider can stand on its legs.
now we flip the spider up and glue a pin base under it and voilaa our spider crystal pin is ready.
Here is an image of it hanging on my curtain.
i hope you liked this tutorial. This is a really fun little thing to make. I hope you guys make it and if you do share the pictures with me.
See you again next time. Thank you for reading my posts.