Computer components are becoming increasingly powerful, more efficient and quieter. Manufacturers are doing everything they can to limit the noise levels of their products, because nothing is more annoying than a sonata of mechanical buzz in the office. However, if you want to get a potty system in your house, you need to have a punitive cooling system to press the decibels.
With a computer, you should not underestimate the importance of good cooling. If a system runs too hot, the processor will start working more slowly to produce less heat. If you've eaten cheese with technology, you can open your system and install a more expensive cooler or extra fans. But a good dust removal can do wonders and make your system cooler, quieter and ultimately faster. Most parts of your computer generate heat. That's why there are a number of fans in your machine to keep the components cool. Otherwise, your PC will overheat, performance of the components will be reduced and the components may even wear out.
1. Plan a heavy dusting operation
Before opening the moneybag, it is not a bad idea to dust your system down completely. A thorough chaste task in your programs can breathe new life into your PC. If you have never done so before, this is the ideal time to thoroughly vacuum the inside of your cupboard. A computer collects a huge amount of dust over the years, and this hinders the cooling system to function properly. Dust is also the main reason why your computer starts to make more noise over time. It is therefore strongly recommended that you regularly implant a dust removal.
Turn off your computer, unplug it from the power outlet and take a compressed air van. Compressed air is the easiest and cheapest way to keep the PC clean. If you don't have a compressed air van, you can also try it with a cotton swab. Now unscrew the back of your machine and spray the dirt out of the fans with the bushing. Best of all you should stop the fan with your finger, because if it turns too fast, it will be broken. Make sure that the dust is blown out of your enclosure and does not return to another component. Do this trick again with the cooling of the graphics card and the power supply. Once you've blown away all the dust, your system will no doubt be a lot quieter and cooler.
2. Ensure network cable management
Now that you have opened the rear or side panel of your computer, it is best to take a look at the state of the cable management in your enclosure. If the cables are sloppily inserted into your PC, the air can flow through your system less easily. Often there are provisions in the housing to clean up your cables, especially the cases that have a glass wall on the side. Try to run the cables along the walls and edges of the cabinet. If necessary, tie them tight, for example with a cable tie. Do not over-tighten, as this can damage the cables and cause short circuits even in extremis.
3. Provide breathing room
If you accumulate so much dust and have to plan cleaning regularly, can't leave it open and close the housing? Unfortunately, but this is a short-term solution that can cause serious damage in the long term. This means that dust and other dirt accumulates much faster, which in the end heats up your PC again. In addition, the power supply becomes dirtier, and the fan in it is difficult to replace. A broken food fan usually means buying a new power supply.
The placement of your computer can have a major influence on the temperature.
Also avoid closed areas in front of your computer, such as a cabinet. The less space the fans have, the higher the temperature in your machine rises. The warm air can't flow away, so your parts overheat. Further, try to keep the environment of the computer cool. That's not always possible - computers don't like the hot summer months - but it's best to place your PC in such a cool room. The more computers there are in a room, the more heat is generated. The placement of your computer can ultimately have a major influence on the temperature: if it is too close to walls or large objects, then the heat can be hunted in height.
4. Put increased under laptop laptop
Laptops have many more cooling problems due to their compact housing. Therefore, always place your mobile computer in a higher position. Not all laptops have fans, but if your computer has one, make sure that they have plenty of space to blow air. You can improvise this yourself by sliding a book or other object under your laptop. Please note that this increase does not cover the fan.
What you absolutely do not have to do is take your laptop on your lap or put it on a fabric surface, which prevents the cooling. If you still want to take your laptop in the chair, then it is best to buy a laptop stand to prevent overheating. For about twenty euros, you can already get one at home, such as the Trust Cyclone Laptop Cooling Stand.
Trust's Cyclone Laptop Cooling Stand features additional fans to cool down your laptop.
5. Resolve the problem in Windows
If the above tips do not work, you can perform some software interventions to make your computer work less efficiently. Dive into the cockpit of your computer to tame your system's efforts and reduce the amount of work done by the processor. Go to' Settings',' System',' Power Management and Sleep Mode' and select' Additional Energy Settings' on the right. Press' Changing schedule settings' in the energy scheme that is checked and then click on' Changing advanced energy settings'. Now scroll to' Power management for processor' and unfold the menu. Maximum Processor Status' changes the percentage from 100% to 80%. Also check immediately whether' Cooling policy for system' is activated.
You can lighten the work of the processor by turning it to 80%.
If this has little effect, you can change the energy mode to' Energy saving'. In the' Advanced settings' you can fine-tune all kinds of configurations so that your PC uses less resources. A screen that is less bright will also consume less resources from your system, for example.
6. Engage external help
If the wheelhouse in Windows does not offer any comfort, you may have a defective component in your system or your cooling is too weak for your system. It is best to go to a local computer shop. If you're handy, you can also upgrade your machine and upgrade your components yourself. The options are endless: you can supply additional fans, buy a more expensive air cooler or switch to water cooling, for example. If you don't know where to start, consult a technician or computer specialist.
