Published via Ecency

Greetings great bosses and welcome to my blog.

Hope you know what day it is yeah?

Yep, you correct... It's Sunday and do you know what we do on Sundays in this noble community?

We do THE CREATIVE-SUNDAY my boss.. we bring out our creativity on Sundays. So here's a piece of mine.

You wanna see it?

Relax with a loving drink cause' I'm about to take you through a ride of popping parties"😁😁 so let's begin shall we?

Let's do some Merlin
In the land of parties at a time of need, the destiny of a great party rest on the shoulders of a young author, his name: Nwothini😁😁

Party poppers are really fun to use in parties as it makes the party more lively by bringing out the colors of the party.

Bored Brown Dog GIF
^{kaboom 🎉🎉}

At times, due to tight budget and inadequate finance, some people cannot afford a party popper and as such, their parties will not beauty of a party popper.

Too sad

BUT

What if I tell you that there's a solution? Will you take it? If yes,

LETS DIVE INNNNNNNN

There's really a solution to that and it's really am amazing one.. you could independently make your own party popper from the comfort of your home and make your party lively. I made one myself and I will show you the steps I took to make myself a beautiful party popper.

To begin with, I got a tissue paper, then I removed the center.

In the next step, I gathered everything I will use to make this party popper and they include:

A pair of scissors
The center of a tissue paper: I'll name this "hollow circle."
A balloon
Colored papers
The nylon of biscuits
A gumming tape

That's all.. everything you need for your awesome party popper 🎉

In the next step, I cut the balloon as shown in the image above, then 👇

I wrapped it on the "hollow circle"

Next, I used a tape to hold the balloon and the hollow circle in place so that the balloon wouldn't pull out when popping.

Next, I covered the "hollow circle" with a green paper and I held it in place using a tape. The reason for the green paper is to cover the taped balloon.
The paper was longer than the hollow circle, so I used my scissors to reduce it to a good length.

How I covered the bottom. NEXT👇

Next, I decided to run the tape vertically on the paper that covered the hollow circle. I did this for beautification, to give it a stripe-like appearance, after which I sealed the top to avoid the paper from popping out.

Next. Looking into the popper, there was a hole in it, so I came to the rescue👇

I used a tape to seal the bottom of the balloon so that anything I put inside the popper will not fall off..

Hole closed 🔒🔐

Hope you're learning something new?

Let's continue

Next, I used the scissors to
to cut the biscuits nylon into smaller pieces. I cut it until it was enough as I needed.

When I'm done, I set the popper ad the pieces of biscuit nylon for a cool photograph.