mikeycinmountp

It still takes about half hour to fouty five minutes I waited to throw shredded cheese on the top till they came out but you can do before or at any stage. ![peppers 1.JPG] ( Most of the time savings are

Fist I used a squeeze clamp and put a bolt with some jam nuts on it to keep in in place through the bar end of a squeeze clamp. Small camera tripods are 1/4" 20 tpi large are 3/8" 16 tpi Use

This is a tutorial on how I tie snell knots, the knots you typically see machine tied on factory hooks. First I decide on which hooks I want to use typically I use either 1/0 or size 4 offset octopus circle

So I looked up above me and saw the craziest thing. It shimmered with an awesome and haunting glow. It was just hovering there very geometric looking. It's the light I built for my wife. It's mostly 3/8

Went on a trip to the American la'France Fire Museum today. Short video of a simulator they had. Will do a write up tomorrow on steemit with more photos ▶️ DTube ▶️ IPFS

*Ok so here it is so far. *Boo vertical picture. I went to the recyling center today to make sure that by the time pickup day comes around that we're not starving for room in it. On the way back I decided

Ok more progress for the desk for my new command center. I'll finish with some clear coat tomorrow if the temperature and humidity allow it. Here it is with the pin stripping job done. Masked out for the

So on the 24th of February last month I went to the Lie Nielsen tool show when it comes around here to Charleston at the American College of the Building Arts. The show was ok but last time I went I wound

I don't have much else on-line presence. So I need to upload everything here then link back to the post.

A pencil holder I welded out of scraps laying around my shop left over from the desk I'm currently working on. Figured it would be best to use them up on something practical within my skill level. ▶️ DTube

So doing all the miters for the desk I'm building I wound up with allot of shorts that I didn't want to waste. Most were close enough to just make matching sets out of them. Before starting I did have

View post on dMania

Taken on a trip to Pheonix. Here is where you put it after the post is up . Hope that works and I hope it helps someone. You'll then need to go to your post right click your photo and select copy link

Ok so I decided to make a desk so I could have some "me" space. I wasn't sure how to make it or what exactly I was going to do, but did know that I've developed a taste for meshing wood and metal.

I made some coffee stain. Was done in a pressure cooker with water, coffee, sodium alginate, and a pinch of baking soda to prevent it from going funky. I plan on using it in a layered effect on the desk

So I'm just saving a list of searches and tags seeing allot of what I seem to be into doesn't make it onto the all tags list, or at least the hot 100. Ok I making this short list (I hope I can come back