Published via Ecency

Today, after a long time, I picked up my sewing machine again. The last time I sewed my suit was when I was in 12th grade. That was the last time, and after that, today, I was using my sewing machine to sew my trousers.

Sewing is a skill that not everyone has, but in my household, it is a common thing because in my house, my mother and my older sisters, who work ten times better than me, have sewing and embroidery that is so beautiful that anyone who sees them just stares at them and forgets to close their eyes.

As we know, winter is over, and the summer season is about to start. I wanted to sew some clothes for myself, but due to some reasons, I had to delay that a little, so I started sewing my clothes now. Today, I touched the sewing machine, so I thought I would save this movement while making my trousers and share it with my friends. So, let me share the procedure of making it with you.

First of all, I took a plain trouser fabric and ironed it well. Now, to cut it, I spread it out well in this way.

Now I have to cut the pants of the trousers from this fabric.

I have taken size 30 in both the width and length of the fabric.

I shortened the front side of the fabric by two inches. After marking, I cut it into a circle and put the marks on both sides 3.5 at the lower bottom.

Following the same step, I cut the back side by leaving the front side two inches longer, and then I stitched the two sides together.

In this step, I have made a cut on the trouser leg and through stitching there, I have added a matching color lace inside it. I bought the lace from the market to create the design.

Finally, I made small triangles from the same fabric and placed them exactly where the trousers were ending, near the feet, and kept a specific distance between them, due to which they looked good when viewed towards the feet. This is also a design. I added both the lace and triangle designs inside my trousers.