DIY Two-Layer Ankara Gown with Headband | Step-by-Step

Words
502
Reading
3 min
Listen
Play
2M

Collage 2026-08-04 09-52-09.png

Happy new month to everyone in diyhub 🎉✨
May this new month bring fresh ideas, steady hands, happy customers, and overflowing creativity.

Today, I will be sharing the full details of the cutting and sewing process of this beautiful two layer ankara gown and headband. 💕

file_00000000a68c820cb627d169cdb743ee.png

Materials
3 yards Ankara
2½ yards lining
Lace net (for the bodice)
Matching thread, zipper

Drafting & Cutting

  1. Bodice (Lace + Lining)
    Fold your lace net into two and place the bodice pattern on fold.
    Shoulder: mark 7 inches (half of 14).
    Neckline: width 2½ inches; depth 3 inches front, 1½ inches back.
    Bust line: measure down 7 inches from shoulder.
    Apply bust: 27 ÷ 4 = 6¾ + 1 inch ease = 7¾ inches.
    Waist: 23 ÷ 4 = 5¾ + 1 inch ease = 6¾ inches.
    Waist length: 14 inches.
    Shape slight curve from bust to waist.
    Add 1 inch seam allowance all round.

Snapchat-1595849959.jpg

Cut same for lining.

Snapchat-1190572776.jpg

Note: The bodice is fitted but not tight.

  1. Sleeve
    Fold fabric.
    Round sleeve: 10 ÷ 2 = 5 inches.
    Sleeve length: 10 inches.
    Draw a short fitted sleeve cap.
    Add 1 inch allowance and cut 2.

Snapchat-1970796229.jpg

3. Two-Layer Skirt (Flare + Gather)

(A) Outer Flare Layer
Fold and lining into four.
Use waist radius formula:
Waist ÷ 6.28 = 23 ÷ 6.28 ≈ 3.7 inches.
Mark 4 inches for ease.
From that point, measure full length (40 - 14 bodice = 26 inches).
Cut a full circle flare.

(B) Inner Gathered Ankara Layer
Cut wide rectangles:
Length = 26 inches
Width = 3 times waist (about 69 inches total for fullness).
Run gathering stitches at the top.

Sewing Process

Step 1: Sew Bodice
Join front and back lace at the shoulder.
Repeat with lining.
Attach lace to lining (right sides facing), sew neckline, turn neatly.
Topstitch lightly.
Join side seams.

IMG_20260729_131358_331.jpg

IMG_20260729_125543_739.jpg

IMG_20260729_133803_142.jpg

Step 2: Attach Sleeve
Sew sleeve seams first.
Fix sleeves into armhole.
Ensure neat fitting—not puffed.

Step 3: Prepare Skirt Layers
Attached lining to main fabric of the flare (leave small opening if no zipper).

Snapchat-358880139.jpg

Gather the second Ankara layer evenly to match waist size.

Step 4: Join Skirt to Bodice
First attach the flare to the bodice waist.
Then place the gathered Ankara on top and sew together.
This creates the two-layer.

Step 5: Zipper & Finishing
Insert zipper at the back.
Ensure it runs through bodice into skirt neatly.
Hem Ankara gather layer neatly and
Press everything well.

file_000000005a0c8230a981c555b5cb7688.png

file_00000000a68c820cb627d169cdb743ee.png

Cutting
Headband: 22" × 5"
Bow pieces (3):
Big: 12" × 8"
Medium: 10" × 7"
Small: 8" × 6"
Center strip: 4" × 2"

Sewing
Sew headband tube, turn and press.
Sew each bow piece, turn out and press.
Pleat the middle of each piece.
Stack (big → medium → small) and stitch together.
Wrap center strip around and sew.
Attach bow to headband.

Thanks so much for your time, support, comment and encouragement as it is always my pleasure to share my creativities with you. Until my next post, do have a great and lovely day

DIY Two-Layer Ankara Gown with Headband | Step-by-Step | Ecency