ENGLISH VERSIÓN
¡Greetings and good day to all!
It is always a pleasure for me to enter this community and share with you my experiences in the world of crafts, and specifically in traditional crafts.
In this artistic path, I like to venture into crafts from the recycling of things that go to the world of waste.
Craft is a hobby to which I feel very attached and it helps me disconnect from the tensions and emotions that larger works produce. This type of work is less intellectual and requires concentration and manual precision, in which even different trades or skills are mixed.
In this case, I bring you a piece in which I used different elements of industrial equipment and products that I describe below.
_Component of a washing machine.
_Deodorant ball.
_Lollipop sticks.
_A bottle for rum.
_A horn component.
_Fine sweet wire.
_Soda can ring.
I also used a cutting pliers and a bowling pliers.
I bought oil and a flat oil paint brush.
Homemade glue and industrial talc.
The objective is to assemble the different elements in the bottle to make a hybrid between a rattle and a carousel.
I applied a paste based on homemade glue and industrial talc to the bottle to create texture throughout the glass body. I then applied a coat of blue oil paint and then drybrushed it to visually enhance the relief effect.
With the lollipop sticks, the candy wire and the rings I made the pendants, and with the washing machine piece, the head of the carousel-shaped rattle.
The rest of the work is explained in the step-by-step photo report. This is a new variant of the bottle decoration that is traditionally done in this type of craft.
Thank you for joining me.
Original text of my authorship.
All rights reserved.
©.
VERSION EN ESPAÑOL
Saludos y buen día para todos!
Siempre me es muy grato entrar a esta comunidad y compartir con ustedes mis experiencias en el mundo de las manualidades, y específicamente en la artesanía tradicional.
En este derrotero artístico, me gusta incursionar en la artesanía a partir del reciclaje de cosas que van al mundo de los desechos.
La artesanía es un hobby por el que siento mucho apego y me sirve para desconectar de las tensiones y emociones que producen las obras de mayor envergadura. Este tipo de trabajo es menos intelectual y requiere de concentración y precisión manual, en el que se mezclan incluso diferentes oficios o habilidades para los mismos.
En este caso, les traigo una pieza en la que empleé diferentes elementos de equipos y productos industriales que a continuación les describo.
_Componente de una lavadora.
_Bolita de desodorante.
_Palitos para chupachups.
_Una botella para ron.
_Un componente de bocina.
_Alambre dulce fino.
_Anilla de latas de refresco.
También utilicé una pinza de corte y una pinza de bolear.
Compré aceite y un pincel plano para óleo.
Pegamento casero y talco industrial.
El objetivo es ensamblar los diferentes elementos en la botella para realizar un híbrido entre sonajero y carrusel.
A la botella le apliqué una pasta a base de pegamento casero y talco industrial para crear textura en todo el cuerpo de vidrio. Después, le apliqué una capa de pintura de aceite azul y, posteriormente, a pincel seco para realzar visualmente el efecto de relieve.
Con los palitos de chupachups, el alambre dulce y las anillas hice los colgantes, y con la pieza de la lavadora, la cabeza del sonajero con forma de carrusel.
El resto del trabajo lo explica el reportaje fotográfico del paso a paso. Esta es una nueva variante de la decoración de botella que tradicionalmente se realiza en este tipo de artesanía.
Gracias por acompañarme.
Texto original de mi autoría.
Todos los derechos reservados.
©.