Basic Seamanship - Knot Making

cynetyc(70)
Published in
#knots
Words
318
Reading
2 min
Listen
Play
9y

Hello Friends!

For today I would like to show a few knots that we use either daily or for special works on board .

A knot is a method of fastening or securing a material such as rope by tying or interweaving .

It is one of the basic things in seamanship and in the same time it is one of the most important things, because a strong knot can make the difference between life and death.

To me knot making is not only important but fun as well because my great-grandfather was a skilled fisherman with over 85 years on the sea .
Before I went to sea as a sailor I had already learned some knots from my great-grandfather .

But let us see some basic nautical knots that we need to know :

20170717_130002.jpg

ooo.png
Note: Here you can see in a strange yellow color a pear shaped knot named monkey's fist. That knot is used as a weight at the end of a heaving line that is used to tie ropes and send them to shore were mooring men will tie them to the bollards on the pier.

20170717_130119.jpg

Knots can be used as a decoration they can be even art.
From a simple knot:

20170816_222347.jpg

to more fun knots like the Overhand Knot:

20170816_223434.jpg

Twist the string or rope into circles , I made 3 circles.

20170816_223504.jpg

Then put the other end into the circles you made and throw and pull the rope.

20170816_223617.jpg

20170816_223634.jpg

The exact way is to throw the rope in the air by holding and pulling the end that you just inserted in the 3 circles you made. If you don't throw them and just pull, you will have this:

20170816_223708.jpg

If you done the correct way you will have this result:

20170816_223807.jpg

The more circles you make the more knots it will be.

Thanks for reading this article and I will see you all next time! Cynetyc Out!

Basic Seamanship - Knot Making | Ecency