Bike safety equipment
It was summer so we needed some cool safety equipment. ^^
So, when I searched a little bit, people wearing bikes wear mesh jackets in summer,
I found that the brand DaNeez is famous here, so I set the brand and searched for the product.
I thought I was doing a bike XXXXX among several online stores, so I ordered it here
So it is the summer mesh jacket that came into my hand.
The product name is Daines Hydra Flux D-Dry Jacket,
Among the various mesh jackets from Da Nez, this guy has the largest mesh area and is said to be less hot in the summer.
Nevertheless, in the sunshine, it was a smile, or something to wear it.
There is a hole in the pouch so that the manual can be seen.
I told her to listen to my daughter once, but she was not heavier than I thought.
The spring and autumn jackets we are holding now are definitely heavy, so when we wore we felt the weight, but this guy seems to be fluttering compared to him.
Dainejogo logo is a little bit of everybody, but I was personally beautiful.
The design that reflects the sharp line of Dainez's only seems to be good ^^
If you look at the two photographs above, the white line is drawn on the arm and the side, so it seems to give a sharp image when worn.
Size is 50, and this is about 100 ~ 105 size when hit by our country.
I usually wear a 100 size ready - to - wear clothes, but now I have to buy 50 sizes,
There are various types of colors. I have to wear them when I am in company. I ordered them with the best looking sword / sword / white color.
There is nothing special about the manual, but there is a manual about D-Dry material, but if you read it, it is a breathable fabric because it drains sweat.
My favorite part is the bike jacket, so I got scotch all over for night visibility,
There is a scotch around the Dyneges logo and back plate. When the flash is blown and the photo is taken, the area surrounding the logo will flash.
If you open the zipper with the hanger removed, it feels like it is messy due to the nature of the mesh jacket.
The jacket on the cold day is a bit stiff, and the pit looks nice, but the jacket for the summer is not good.
If you open the jacket inside the D-Dry jacket at the time of desorption, it is embarrassing to say that the jacket, and it contains the level of D-Dry material lining.
It looks like it's coated, but it's a very dense material,
So I beat this guy and I'm wearing it now.
When I get a little cheerful, I will try to put it back.
Yo D-Dry lining is connected with mesh jacket main body with button.
I hung up and down the button on the top.
The other side can peel off when you press the button like this.
The jacket contains a CE certification protector for the shoulder, elbow and elbow to the wrist.
It certainly felt like being protected.
Safety riding will be your top priority, but peace of mind comes when you have a guard.
I have not tried pants yet but I would like to know about pants for riding sooner or later ~
The jacket contains a CE certification protector for the shoulder, elbow and elbow to the wrist.
It certainly felt like being protected.
Safety riding will be your top priority, but peace of mind comes when you have a guard.
I have not tried pants yet but I would like to know about pants for riding sooner or later ~
When the spine protector is inserted, the back plate will protrude?
So, would not it be uncomfortable to drive?
I would like to hear how you use the spine guard.
Even if driving is a little uncomfortable, it is not a compromise in safety, but it seems to be an item that makes you think about the extra cost by somehow, but I do not want to buy it. haha
This is the scotch reaction I mentioned earlier.
Normally, it is just black, so the Dainegiz logo looks like a rock, but when I take a photo with a flash, I see the logo so white.
I've been riding a D-dry jacket for about a week,
It was definitely light, and above all, it was cool when I was in the wind.
And I have a protective jacket on the jacket, so I have a strong feeling.
The following are riding gloves.
I also bought autumn and winter gloves, so I bought a lot of sweat on my hands this time.
Anyway, the full mesh glove is a little defensive when it falls, so it seems that the leather is mixed moderately, so I bought a product with a protector on the back of the hand.
The product name is Daines MIG C2 glove, and as a professional bike brand, CE certification is a must.
Well packed and delivered to me.
I was able to purchase the equipment very easily because the boss gave me a consultation with Katok when the size was chosen fast.
Above all, shipping is good.
FC-MOTO I'm going to go straight for 2 months delayed delivery, but I almost came out of it, just a little more to buy in Korea is not too bad. I would have been worried if there was a lot of difference between the straightball and the price difference, but the price of the bike XXXXX was not bad, so I canceled it without hesitation and bought it here.
The price tag for the product is 140,000 won, but I bought it at 100,000 won. ^^
I have a small hand, about 21cm around the palm.
Dainezu gloves size chart, S size fit perfectly in my hand, he says.
It's a product manual, but I do not have English manual, so just throw it away.
Now is the product picture.
In case of a fall, the thumb and thumb are twisted and the mesh is not applied because it is likely to slip on the road surface. The rest of the fingers are 50% mesh applied.
And a little mesh is applied to the wrist part.
And more than anything, a dignified hand protector! I feel like I'm not a bike glove without it.
Finally, I can say that the red Dyneez logo is the peak of Hwangryong. ^^
The palm part is mixed with leather and suede.
I have a logo on my palm called MIG, but I think it's somewhat in the wrong place.
And because there are gray and white stripes on my fingers, I feel like I have a feeling that the appearance will be a smartphone touch, but I did not expect it. I think it will look just like a design.
Even if it touches the smartphone anyway, it was a little ambiguous to take the screen with the bike glove.
It is thick and it is this ^^
It is the protector of the back of the hand.
It's like reinforced plastic, and it's written like Daines.
And that's what I said before, MIG. It's like there's a story when you see this stuff hanging like this.
One other thing I want to say is that the quality of the stitched quality look better than I thought, and it is well stuck without one.
I like this detail very much ^^ I also see the thumb to see something to protect the buffer structure, and more freely moving on the joint side is applied elastin material.
I think it's safe to put a thick leather on the little finger!
Mesh is applied to the top of the fingers, and it is padded with leather.
The fingertips are made of suede. Red Danejjogo perfect fit in the wrist part! Does not it look very attractive ?!
Mesh is applied to the wrist.
The leather quality looks very good too. I tried to wear it now.
It has a wrist strap, and it has an elastane material at the entrance to the hand, making it easy to put it in.
It looks like this from the top.
S size is perfect for my hands.
I felt that it was a perfect fit as a whole because of the new product, but since I have been using it for a week, it seems to fit in my hand as it grows little by little.
Finger length is also like a custom made completely. haha
Here is a picture of the last part of the palm.
I feel like I have used suede material to improve grip because it is part of gripping the steering wheel anyway.
In the summer, I bought Daisy's brand mesh jacket and summer gloves. I liked the price, and I liked the quality. Now I need to ride safely with these guys ^^
It was more than Daison mesh jacket and summer glove posting.
