Hello everyone I’ll be presenting my second #recyclingdiy project. I have already said it that I’ll be having numbers of recycling to present before the end of this month. About two days ago I recreated a pendant for a necklace using a Nivea for men rollon. Inside the empty bottle where I removed the rollon looking like ball I used for my last creations there was still something from the empty bottle I found to be useful as a decided using it for todays project. The material I’m using today is found inside Nivea for men its what holds the rollon itself.
Materials
Empty rollon holder
Gum
Red colored dot bead
Red colored sand bead
White colored dot bead
Black colored dot bead
Wire
Black rope to help with necklace
Let me not delay for this recycling project. Looking inside the rollon holder there’s a space that look like ball and inside the three areas I have to insert red colored sand bead and how I did it was to pour little gum gum first to the center I then placed 1 red colored sand bead into the center and I allowed it to dry which stayed about minutes. I then poured another little gum to one side of the wheel inside the the rollon holder and I placed about 3 I allowed it to dry. In the second of the wheel inside the rollon holder I also poured little of the gum by placing another 3 red colored sand bead. In the third wheel inside the rollon holder was another little gum I poured and placing of another 3 red sand bead.
From the edge of the rollon holder I poured little gum and I placed 3 white colored dot bead. From the side I also poured little gum and placed 3 red colored dot bead and I have always allowed them to dry before I move to the next stage. This how i inserted 6 white colored dot bead and another 6 colored dot bead into the edge of the rollon holder but I did the placing of the beads by 3 red and 3 white colors in separation.
From the back of the rollon holder I poured gum little of it and placed 1 black colored dot bead which I ensured to be in the center because that is where the wire for the necklace will be inserted. I poured another gum and I inserted 3 white colored dot bead and 3 red colored dot bead to both sides of the rollon holder edge. From the down of the rollon holder edge I poured little gum and placed 2 red colored dot bead and 2 white colored dots bead to both sides.
In conclusion I cut a wire and then bend it using a plier but in a careful manner to avoid injury. From the black colored dot bead I poured little of the gum inside of it and then inserted the wire. I’m make sure I hold the wire without my hand shaking so the wire could hold well. I then inserted the black rope which is a match for the necklace wearing.
