This is one of the easiest designs because it's some dots and lines, nothing too complicated.
Products that i used:
- base/non wipe top coat
- silver flash gel polish
- red gel polish
- 2 different sizes of dotting tools
- a thin liner brush (i had to cut mine to make it thinner)
- a palette
- a tip
Only the silver flash, red and non wipe top coat gel polishes are Bluesky
If you would like how i did this design, please keep reading.
First i applied the base coat and i cured it in the LED lamp.
Then i applied one coat of the silver flash gel polish.
I applied and a second one. This gel polish requires and a third coat, but i did it on a tip so it's fine.
This is how it looks with the flash turned off.
Then on my palette i put a drop of the red gel polish.
And i did a dot as the center of my first flower and i cured it.
Then i did a dot with the same size just a little further and i add two more dots.
This is how it looks but in this step i didn't cure it.
With my liner brush, i draw some lines from the three dots to the center, but without touching actually the center. And this is my first petal of the flower.
Then i added two more petals, and my first flower is ready.
But i didn't stop there. I wanted to create one more and i did it. But then i saw that there is still a gap so i did and a third one.
This is how it looks with the non wipe top coat without the flash.
And this is how it looks with the flash turned on.
And then i went close to the window to show you how it looks with the natural sunlight.
Without flash
With flash
Photos by @georgia11