#z9mini

The New Beast is Ready!!! I have built a new case for my 4 hashboards. A cube in a cube. Get it into the case !! Here are the new fans from Cougar Vortex. From the case. Cabling everything and action.

I had thought about how I can cool the second hashboard better because the temperatures were still too high for me. For this I wanted to place a Noctua-A8 on the hashboard mount. In advance, I have already

After a few tests and observations, I decided to change the hashboard arrangement again. Thus I have even more airflow in the middle. Currently everything is running very stable at 625 mhz. The 4th Hashboard

CASE changes: Have again changed the placement of the hashboards and this also improved the cooling. Complete “z9-Mini-Cube“ again rewired and made new grid for the boards. I have also reinstalled the

The last days started overclocking. Currently I'm at all 4 hashboards at 618 mhz. About 17.5 - 18 ksols. It runs very fast. I am very Happy about this Stats ;-). In addition, a good colleague has built

After many hours of testing, I finally found a firmware that works. I currently use "Antminer-Z9-Mini-NAND-500M-201808311812-unlocked-factory.tar.gz" firmware. When booting all 4 hashboards are

My first PC at the time was a benchtable. Since I run the z9 mini at home in my living room, I had to think of course because of the volume. In addition, I realized that there is a fourth slot for another

My next project once again involves a conversion. I used to have a bench-table for my PC. Now I've thought about this concept to build with the Z9 mini. Noctua NF-A20 will support me twice. My basic will

Once again moved to a new apartment and thought why my setup does not make even quieter than currently. (15 to 18 Decibel) SilentX has served me well so far, but I wanted more. So off in the basement to

Video - Click on the Image to Play My z9 mini hashing away. #z9mini #z9miners #asicminers #britvr #share2steem britvr_crypto Posted from Instagram via Share2Steem

My Z9Mini(modification-for-home) -- Noctua experiment was very successful but still it irritated me to get the miner even quieter. After a long search and hundreds of test reports, I came across ALPHACOOL

1.Remove Bitman standard fan from z9mini. 2.Remove the rear grille. Attention the warranty expires then. Attention now the hashboards are loose and can fall out. 3.Buy or build yourself "fan