#swage

Follow to get notified about new posts with this tag

stevesmithagain

7y

Destructive Pull Test

Destructive Pull Test

I have been telling people for years that swage fittings are stronger than mechanical fittings based on an article I read from Good Old Boat magazine that was written back in the 90’s. The article compared

$ 0.118

39

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Designer Bullets (Part 24)

Designer Bullets (Part 24)

Something strange is afoot at the reloading bench... Elvis Ammo Loading "DESIGNER BRASS" w/Custom Bullets! Reloading Made Beautiful.. ►The bullets I've sent out bullets before were "as is",

$ 0.000

0

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

"Factory" Seconds (Part 23)

"Factory" Seconds (Part 23)

These clearly didn't make the cut, but they're fine for plinking. ►The bullets I've sent out bullets before were "as is", because it's fine to leave the swage lube on, and that left the option

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

They've taken a bit of a tumble! (Part 22)

They've taken a bit of a tumble! (Part 22)

They clean up rather nicely! ►The bullets I've sent out bullets before were "as is", because it's fine to leave the swage lube on, and that left the option open whether to shoot them that way,

wiseagent

Movies & TV Shows

18h

We need to talk about bad movies.

We need to talk about bad movies.

This publication was also writen in SPANISH and PORTUGUESE. Final Draft Bad movies... Who has never watched one, right? Sooner or later, everyone who likes cinema (or who simply watches movies randomly)

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

It's Hammer Time! (Part 21)

It's Hammer Time! (Part 21)

A little something that's made casting easier. ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order RBT kit). ►Here's a bit more info you might

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Final Trim/Square Jig (Part 20)

Final Trim/Square Jig (Part 20)

And here you were thinking that you'd finally seen the last of me. Let's see if we can't straighten things up just a bit. ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

FINALLY! (Part 19)

FINALLY! (Part 19)

I think I've FINALLY got it right! (famous last words...) ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order RBT kit). ►Here's a bit more

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

A Big Little Update (Part 18)

A Big Little Update (Part 18)

Just a few updates. ►Since it's proving to be even harder than I'd expected, I'm extending the contest to all platforms where I upload this video. They will all be grouped as one single contest, and there

apnigrich

12h

Sula - The History of Belarus

Sula - The History of Belarus

Sula - The History of Belarus

My journey in Belarus continues. Do you remember, friends, that on the first day I visited Kostroma and Yaroslavl? Of course, these are also Russian cities. Yesterday, our team was on the road all day

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

The Heavy Hitters (Part 17)

The Heavy Hitters (Part 17)

Time for some heavy metal! ►Intro music: 20 Lb Sledge (YouTube's own Alfonzo Rachel) Song: Crazy and I Like It Album: Divine Battery ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

A "little" rant about problems I encountered making 77 grainers (Part 16)

A "little" rant about problems I encountered making 77 grainers (Part 16)

The 77 gn have been a bit of a pain, so I ended up making a long-winded video about my struggles with getting them "right". ►Looking at the samples, the good ones here look just as good, so maybe

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Core Shaker for 1" Casings (Part 15)

Core Shaker for 1" Casings (Part 15)

I made a core shaker for the trimmed 17 HMR & 22 WMR casings. ►The "funnels" just had to be made larger, so they had to be spaced differently, and the the plates made deeper than the 22lr

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Trimming 17 HMR/22 WMR to Final Length (Part 14)

Trimming 17 HMR/22 WMR to Final Length (Part 14)

Let's trim some 17 HMR & 22 WMR to final length and get them ready for core seating. ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order

forkyishere

hivesuite-mx8cbl9g

5d

Testing some apps on my Tablet

Testing some apps on my Tablet

Didn't really feel like posting for a while, but today I found a reason for it. Both to revisit the experience on Android and because I happen to have an Android tablet, I wanted to see how the compatibility

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

17 HMR/22 WMR Derim and Size (Part 13)

17 HMR/22 WMR Derim and Size (Part 13)

Happy New Year! Let's derim & size some 17 HMR & 22 WMR ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order RBT kit). ►Here's a bit

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Point Forming 55 gn Bullets (12)

Point Forming 55 gn Bullets (12)

In the Twelfth Month of Winter, my swage press said to me..."Let's get to the point"! ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Core Seating (Part 11)

Core Seating (Part 11)

Time to do some core seating ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order RBT kit). ►Here's a bit more info you might be interested

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Sort by Headstamp (Part 10)

Sort by Headstamp (Part 10)

Sorting 22lr casings by headstamp. ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order RBT kit). ►Here's a bit more info you might be interested

vscampbell

5d

Meet Val Campbell

Meet Val Campbell

Meet Val Campbell With more than 40 years of experience in business ownership, consulting, leadership, and team building, Val Campbell brings a lifetime of practical business experience to Second Desk

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Prepping 17 HMR/22 WMR brass (Part 9)

Prepping 17 HMR/22 WMR brass (Part 9)

First steps of processing 17 HMR/22 WMR casings. ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order RBT kit). ►Here's a bit more info you

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

17 HMR/22 WMR Jig Update (Part 8)

17 HMR/22 WMR Jig Update (Part 8)

Jig update ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order RBT kit). ►Here's a bit more info you might be interested in: Corbin Handbook

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Annealing 22lr Brass (Part 7)

Annealing 22lr Brass (Part 7)

Time to anneal some 22lr casings. ►I'm using a BT Sniper Deluxe kit for swaging .224 flat base and rebated boat tail bullets (a one-off custom order RBT kit). ►Here's a bit more info you might be interested

psykoklown

8y

!Low reputation account with an unverified outbound link, Reveal content

Derimming 22lr casings (Part 6)

Derimming 22lr casings (Part 6)

Derimming 22lr casings ►I'll make a separate video on derimming & trimming 17 HMR & 22 WMR since it's a bit more involved. The reloading bench: Source of bench idea:: ► ►I did my own take on things.