A couple of days ago I wrote a post called Why I'm learning FreeCAD. After that I wrote this post in Waves: Just created a new post. It's the first where I've used ChatGPT to proof-read. Please note, that

I’ve been using Autodesk’s Fusion 360 for a long time and have grown to love its ease of use, coupled with its powerful features. However, after reading many comments, watching videos, and going through

Hallo Hiver, Hallo kreative Köpfe, das heutige Projekt ist natürlich Weihnachten gewidmet. Habt ein noch ein paar schöne Weihnachtstag. Viel Spaß bei meiner kleinen Fotoreihe. Link: Thingiverse Hello Hiver,

Hallo Hiver, Hallo kreative Köpfe, das heutige Projekt ist eigentlich nur eine Übung für mich gewesen, aber weil ist zum Schluss, was richtig Tolles bei rumgekommen ist, möchte ich es euch nicht vorenthalten.

Hallo Hiver, Hallo kreative Köpfe, JA ihr sieht richtig, ich habe es getan! Wie kann Cappuccino noch besser schmecken? Richtig mit HIVE! Mit Fusion 360 und meinen 3D Drucker hat der Cappuccino nie so gut

Hallo Leute, heute eine kleine Fotoreihe / Bericht vom Vogelhaus und den fehlenden Halter für den Balkon. Link: Thingiverse Hey Guys, Today a small series of photos / report from the bird house and the

Hallo Leute, heute ein kleiner Bericht von meinen Projekt: Advents-/ Geburtstagsspirale :) Nach langem tüfteln mit Fusion 360 stand die erste Skizze für die Holzspirale. Mit meinem Durchmesser von über

I've been rebuilding some plans in Fusion360 of some deckchairs that were my first ever real woodworking project. The reason for rebuilding is that I've updated the builds with a couple of fancy features

For School purposes only. ▶️ DTube ▶️ YouTube

I finished using Fusion 360 to redesign my drill press stand to incorporate my vacuum. There's nothing too fancy but it makes things easier having plans to work from. Truth be told this is just a reformed

I’m not going to lie to you, I will always use technology over old school every time. It’s not that I don’t like pen and paper. It’s a great medium but I find it limited due to physical constraints that

A few weeks back I submitted a cactus design made of two parts that are impossible to print using traditional manufacturing techniques (e.g. CNC, Molding) for a design competition on myminifactory.com.

Well it's been over a week since the last update, so i think it's about time i post where its at. I can see the finish line rapidly approaching on the design aspect of this project as i only have a few

Yesterday I got inspired to 3d print my own plant pot and came up with the following design. The design has been made using the free (for hobbyists) CAD software Fusion 360. All that was needed was to

I recently had my friend create a model for me to 3D print and it became immediately clear that while Fusion 360 is widely available, it is not as beginner friendly as most people online make it seem.

Cloud platform Source of shared Link

Testing out Autodesk fusion 360 software. My live stream is at DLive