Hola mis amigos azules tiempo sin pasar por aquí, pero a veces no me pide el cuerpo o mi mente hacerlo, o porque estoy en clases, aunque tuvimos muchos meses sin clases por el paro de los maestros, profesores, pero ya retomamos y con rapidez recuperando los días perdidos y ponernos al día, para salvar el segundo lapso.
Ya me falta poco para mi graduación de Bachiller, algo que me alegra, que no ha sido fácil para mi, pero tampoco fue imposible, superando barreras, con el gran apoyo de mi mama.
En Venezuela desde un tiempo hasta ahora para optar al titulo de Bachiller también debemos tener dos requisitos cumplidos como son los proyectos comunitario y científico.
Les voy a contar primero sobre el Proyecto Comunitario Escolar, que no es mas que una obra o labor que debemos realizar los estudiantes de 5to año pronto a graduarse, el proyecto a veces viene como ordenado por la Zona Educativa que es el organismo de Ministerio de Educación en la ciudad, que el mismo puede realizarse para beneficiar por decir un área de un modulo de salud, o una escuela, pero en este caso esta vez se decidió que el beneficio quedara en el mismo liceo, que haciendo un diagnostico sobre las necesidades que presenta el liceo, la necesidad esta en reparar las mesas y sillas que usamos en las aulas, que muchas están ya sin tablas, quedo aprobado en asamblea que ese seria el proyecto comunitario.
La institución recibió un donativo de tablas, el cual ya llego la primera parte, la labor sera ser como carpinteros, pero como no tenemos ese conocimiento, la directora consiguió de un señor que si trabaja la carpintería y trabajo por muchos años en una empresa llamada Propulso, en la población de Soledad, que ahora se llama Ciudad Orinoco.
La directora cuando fue a buscar las tablas.
La primera parte para este proyecto fue recibir una inducción teórica sobre como reparar las sillas y mesas, la misma se hizo en el liceo, pero por turnos, como soy de 5to A, fuimos los primeros, que una vez terminamos nos fuimos, a esperar cuando nos llamaríamos para empezar el proyecto.
Algunos de los momentos durante la inducción al Proyecto Comunitario.
Llego el llamado para iniciar el proyecto un día lunes de verdad yo estaba como nervioso, porque pensé que podía ser como mas difícil, pero como estaba el señor Carlos que es el instructor, también estaba mi mama, pero que mas que todo hacia era tomar las fotos je je je.
Empezamos por las sillas, que tuvimos que subir todos a buscar nuestras sillas, la mayoría de las sillas lo que les hacia falta era la tabla del espaldar. Ya una vez abajo cada quien con su silla el señor dio las indicaciones, el trabajo peligroso lo haría el que es picar la tabla a la medida del espaldar.
Una vez picada las tablas, la debíamos fijar en las sillas con los tornillos, el cual lo debíamos hacer en equipo de dos, porque no era tan fácil, mientras uno atornillaba el otro agarraba la silla.
Todos activos y yo también.
El siguiente paso era lijar la tabla de la silla, para que quitarle las asperezas y astillas, aquí todos trabajamos tanto los varones como las hembras. La directora nos visito un momento y estaba muy feliz de ver el trabajo que estábamos haciendo, que después fuimos a la tarima cada uno con su silla para la foto.
Aquí estoy tapándome uno de los oídos ya que soy intolerante a ese tipo de ruidos y luego lijando.
Con mis compañeros de clase la primera parte que fuimos ese dia.
Con la directora, coordinadora, subdirectora y el instructor.
Aunque no hemos terminado, para la tercera parte fuimos pero el señor no fue, pero de verdad ha sido una bonita experiencia para mi, saber que si puedo hacer las cosas, que no creía hacer.
Mas contar con siempre me apoyado como ha sido mi mama, como también todo el personal del liceo, y ya mas cerca de esta meta, que parecía lejos y ya casi termina, para después descansar un poco, mi otro gra sueño es llegar a ser un buen Mecánico.
Como dije mi mama me acompaño y tomo las fotos con su celular Samsung A12, gracias Mama.
Contenido propio y original traducido con DeepL.
Hello my blue friends time without stopping by here, but sometimes I do not ask the body or my mind to do so, or because I'm in classes, although we had many months without classes due to the strike of teachers, teachers, but already resumed and quickly recovering the lost days and catch up, to save the second lapse.
It has not been easy for me, but it was not impossible either, overcoming barriers, with the great support of my mother.
In Venezuela for some time now to qualify for the title of Bachelor we must also have fulfilled two requirements such as community and scientific project
I am going to tell you first about the School Community Project, which is nothing more than a work or work that we must perform the 5th year students soon to graduate, the project sometimes comes as ordered by the Educational Zone which is the body of the Ministry of Education in the city, that the same can be done to benefit for example an area of a health module, In this case, it was decided that the benefit would remain in the high school itself, and after a diagnosis of the needs of the high school, the need to repair the tables and chairs that we use in the classrooms, many of which are already without tables, it was approved in the assembly that this would be the community project.
The institution received a donation of tables, the first part of which has already arrived, the work will be as carpenters, but as we do not have that knowledge, the director got a man who works in carpentry and worked for many years in a company called Propulso, in the town of Soledad, which is now called Ciudad Orinoco.
The director when she went to get the boards.
The first part for this project was to receive a theoretical induction on how to repair the chairs and tables, the same was done at the school, but in shifts, as I am from 5th grade A, we were the first, once we finished we left, to wait when we would be called to start the project.
Some of the moments during the induction to the Community Project.
The call came to start the project on a Monday, I was really nervous, because I thought it could be more difficult, but as Mr. Carlos was there, who is the instructor, my mom was also there, but the most important thing was to take the pictures heh heh heh heh.
We started with the chairs, we all had to go upstairs to get our chairs, most of the chairs were missing the back board. Once downstairs, each one with his chair, the gentleman gave the indications, the dangerous work would be done by the one that is to cut the board to the size of the backrest.
Once the boards were chopped, we had to fix them to the chairs with the screws, which we had to do in a team of two, because it was not so easy, while one screwed the other held the chair.
All active and me too.
The next step was to sand the board of the chair, to remove the roughness and splinters, here we all worked both males and females. The director visited us for a moment and was very happy to see the work we were doing, then we went to the stage each one with his chair for the photo.
Here I am plugging one of my ears as I am intolerant to that kind of noise and then sanding.
With my classmates the first part we went that day.
With the director, coordinator, assistant director and instructor.
Although we have not finished, for the third part we went but he did not go, but it has really been a nice experience for me, to know that I can do things that I did not think I could do.
I have always had the support of my mother, as well as all the staff of the high school, and now closer to this goal, which seemed far away and is almost over, and then rest a little, my other big dream is to become a good mechanic.
As I said my mom accompanied me and took the pictures with her Samsung A12 cell phone, thanks Mom.
Own and original content translated with DeepL.