Here's another update about my day to day at work, today I changed the innertube of a very popular e-scooter called the dualtron mini limited.

This is a scooter with a 58volt 21amp battery that has a range of 70km(43.5mph) and has a top speed of 55kmph(35 mph),

These scooters are very easy to rapair flat tires on because the wheel comes apart in two pieces. Here are some pictures

dualtron mini limited____rear wheel before the change_rear wheel after the change

The dualtron mini limited is limited because it's the largest battery version of the dualtron mini, which usually comes with a 13amp or 17amp battery, and the limited also comes with the same front brake as the last post, where I talked about installing it on the speedway leger.

Here are some of the steps that you would have to go through to change the inner tube of the average e-sooter

In these pics I'm removing the screw that anchores the drum brake and removing the nuts from the axels then I disconected the brake cable so we can drop the motor.

Here you can see how to remove the 6, 4mm allen screws to take the rim off and change the tube and tire if damaged like the one in this pic.

Then the last thing to do is change the parts that need changing and reverse the same steps showed before and you are ready to go and ride to get another flat

I hope this was an interesting post, and sorry that for all the pics but its easier to explain showing what I'm talking about

A picture says more than a thousand words

See you again very soon and I will be posting more about the day to day of working on electric scooters