I hope that this service will get popular. It requires a bunch of users with plenty of car problems. It seems like right now there are so few people on Steem and even fewer with cars. I really hope that

This is not spam. I provide professional help daily to anyone with automotive problems for free. Did you read the post?

Thanks, I would guess that the device you had plugged into the OBD2 connector was faulty and caused the issue. Since it burned the pins on the connector, I would have that connector replaced and the wiring

2-strokes are very sensitive to air fuel ratio and the amount of fuel delivered to the combustion chamber. They are also very cold natured. It sounds like the carburetor is not jetted properly. I recommend

I was in a hotel and saw your show on the TV and I was so excited seeing you on one of the channels. I was almost like the John Hill memes that got so popular. The excitement was because you were so active

I'm not sure what you are driving, but it could very well be the IAC (idle air control) actuator. This pesky thing gets dirty and and stops actuating properly. It is designed to allow air into the intake

I've rode dirt bikes and crotch rockets for many years. One very important thing I've learned is that synthetic oils are not good to run in a crankcase in a motorcycle. As a two stroke oil is a different

The synthetic oils were created to handle extreme cold weather to prevent the oil from gelling. They also have the advantage of handling higher temperatures and are very slippery. Unless you live in the

Why would someone go through the trouble of changing the steering to the opposite side? I would have to say that yes, there is something to worry about. If a wiring harness melts, it would be a good amount

OOOOOOO

There is a service bulletin for this issue: #PIP4112R Recommendations / InstructionsBoth of the above conditions are a result of Torque Management and both of these conditions should be considered normal

Pulling apart? Pulling out of the transmission? CV pulled apart? Pulling out of the brake assembly? There are many parts there. If the axle is actually pulling apart, then the components that link your

Ain't that the truth!

Here is my feedback. If you are truly out of survival mode, you should be working on getting STEEM listed on exchanges to support the success of SMTs, but there is no mention of this. What are you doing

Bad drivers XD

HF-20 debacle We have heard these promises many times before with nothing ever delivered. They even had an era of prosperity with huge hiring spree and spending with no release of SMTs as promised.

That is terrible. Just be thankful you are OK. I can understand that a brand new car doesn't feel so brand new if it has been damaged even when it has been fixed. This happened to me just last month After

Hmmm. I don't think I can give advice on repair contracts. I normally fix my own stuff and avoid them. Repair contracts will most likely pay none of the troubleshooting costs. Keep that in mind. Sorry

Thank you. To bad there are some haters.

I haven’t given it much thought. I don’t really think hf21 is going to make any difference. The difference will come from the market instead. It’s on fire right now. STEEM hasn’t jumped on the rocket ship