sleong

After some thought I decided I am going to sell my rig. I initially got started as a hobby as most of us have and due to some changes in the office where I am hosting the rig, I no longer have that space

Software setup? the mine.sh file or what setup are you referring to?

I recently rebuilt my rig and now everything mines at 0.00MH/s. Everything has been installed and configured the way it was before. I tried moving the video cards onto difference PCIe slots and difference

The rig is mining flawlessly! Under 17.50 and Claymore 10.

I am running 6 GPUs with the bios switch as well. And so far things are running pretty good! I have only had one blip but not sure what was the cause. Had to do a restart and that was about it. Since then

As per DarDann in the very first post! I had a problem with the new drivers and this command solved it with the 17.50 version "amdgpu-pro-install --opencl=legacy,rocm --headless"

I have found more info and it appears that I cannot use Claymore in Ubuntu to undervolt or control the GPU too much. All I can do is flash the bios and get a better hashrate. But if I was to switch over

I'm running my rig on Ubuntu server with 5 Sapphire Nitro+ RX580's, trying to locate longer PCIE power cables but not easy to find in my area. As I do have one more RX580 not mining at the moment. Anyways

I got it figured out thanks. It also got it to mine but is there a way to monitor how much has it mined like a gui dashboard, or a stats page that tells you the average hash you are mining at etc.

I ran into an error with this: ./amdgpu-pro-install --px And then I used the headless command as noted by dardann but then when I try to run ./mine.sh I get the following error below: This pool