Welcome friends on #hive,,today my will share about my experience as a two-wheeled motorcycle mechanic.
I'm sahlana, I'm a newcomer to #hive and this is my second publication on #hive after I finished publishing my introduction yesterday beucause my daily profession as a motor mechanic and this is my first content on HIVE motor.
Being a two-wheeled motorcycle mechanic is certainly quite fun for me because assembling motorbikes is a hobby for mechanics.
And it's really nice to meet mechanical friends all over the world and of course we can share various experiences on how to repair motorcycle engines, from minor damage to the stage of dismantling the engine.
In my first publication on #hive motor I would like to share the stages of system repair about compression, ignition, and fuel when combustion will function.
In question.
what's that compression on the motor according to friends at hive.
According to my experience being a compression mechanic is the of the air in the cylinder before installing the spark plug It is connected to the engine power so that it can be turned on.
piston in motion He will reduce the volume above the tightly closed compression occurs.
Compress will disappear with a leak in the valve bottle.
valve bottle is part of the process to get strong compression in the engine
What is compression in a motor.
He makes the pressure inside the valve that closes then the potential waves inside will cause a very strong explosion
What will happen if the compression is lost?
There will be a weak pressure wave the engine cannot be started.
Then the steps that will be taken by the mechanic by dismantling the engine replace the new ring and piston.
Ignition on the motor
We continue with our friends at hive motors. Where did the ignition of the motor come from?
.
Of course the mechanic can answer that.
Ignition occurs in the rotation of the engine when the engine is turn, in which there is a spull and pulsel if both are not present then there will be no ignition.
Ignition from the spull to the CDI from the CDI to coil.
Ignition that comes out of the coil will enter the spark plug where the last ignition occurred so that the motor can be started
How do I work the motor that is brought to the service center does not turn on.
I'm a mechanic
From the experience I've had when the engine doesn't have ignition, I'd check the spark plugs first because that's where the final ignition peak is.
Ignition is the stage to start the engine
The last stage, of course, everyone already knows
combustion required on the engine combustion is the last component in starting a dead engine.
this is my experience how to start a machine that doesn't start.
my friends at #hive may be more experienced in the mechanical field than me.
In this meeting I hope there are comments from you to add to my experience in the automotive field
thank you this is my short experience for you how to turn on a dead machine.