In my previous post, i talked about videogames i was playing when i still was a child. Currently, most consoles that i played the games on aren't in production anymore, or are so expensive i'd have to take a loan out. Luckily, there is a way on how to build your own retro gaming console, which supports over 50 retro platforms!
retropie-4.2-rpi2_rpi3.img.Download Win32DiskImager
Using a microSD adapter, insert your microSD card into your PC
Launch the Win32DiskImager utility. You should see this window:
Under the Devices tab, select the letter of your microSD card
Under the Image File tab, select the .img file you extracted in the previous step
The end result should look like this:
After you are fine with the settings, press Write and wait for the operation to complete.
Safely eject your microSD card from the computer.
Open the Terminal.
Run df -h to see what devices are currently mounted.
If your computer has a slot for SD cards, insert the card. If not, insert the card into an SD card reader, then connect the reader to your computer.
Run df -h again. The device that wasn't there last time is your microSD card. Remember the device name, it should look like this: /dev/mmcblk0
Now you will need to format the microSD card to FAT32. For that, i recommend using the GParted Partition Manager. Here is a tutorial on how to do it.
Unmount the microSD card's partition using the umount command. For example, if your device is /dev/mmcblk0, use the command umount /dev/mmcblk0p1
Note: the p1 part stands for partition 1. If there are more than one partitions on the microSD card, use the same command, changing the number. For example, to unmount the second partiton, use umount /dev/mmcblk0p2, and so on
After you have successfully formatted and unmounted the microSD card, write the .img file you extracted earlier to the microSD card using the syntax dd bs=512k of=/device/name if=/path/to/image/file.img. For example, if my microSD card is named /dev/mmcblk0, and the RetroPie image file is located in /home/redectro/retropie-4.2-rpi2_rpi3.img, my command will look like this:
dd bs=512k of=/dev/mmcblk0 if=/home/redectro/retropie-4.2-rpi2_rpi3.img
Press Enter, and wait for the operation to complete.
Remove the microSD card.
Connect the Raspberry Pi to the 5V 2.5A power supply (Assuming you are using the one i linked in requirments)
RetroPie must boot up. After a while, you will see this screen:
Just as the screen says, press and hold any button on the controller. After you do that, you will see this screen:
You will need to configure the buttons. If you are using the controller i linked, use this image for reference:
After you get to the "OK" button, press the button you assigned as (A) in step 4.
If you see this screen:
Congratulations! Now you have a fully working, multiplatform retro console! Here are some extra things you will need to get started:
Well, i'm going back to playing Ocarina of Time and Mario Kart 64. If you liked my tutorial, resteem, and if you have any questions, ask me in the comments below!