Cómo hacer un paisaje con resina casera. Por @ramaco54.

Words
920
Reading
5 min
Listen
Play
3y
Muy buenos días a mis amigos de HIVE, desde Cumaná les saluda su amigo Ramaco, el pintor cumanés, quien les trae una publicación artística, que espero sea de su agrado.

Bienvenidos sean una vez más al blog de:

ramaco54@ramaco54

Framboyan y el pajarito ignorando el tunel del tiempo.

alt

MATERIALES.

Los materiales que utilicé en la realización de esta pintura fueron: resina casera, acuarela, acrílica, cartulina,espátula, pinceles de celdas suaves y pinceles de punta fina.

RESINA CASERA.

La resina casera se prepara, con los siguientes ingredientes:
  • 1 litro de gasolina o tiner.
  • Anime o plástico de envase de refresco transparente.
  • Un envase de vidrio.
  • Una espátula de metal.

Preparación.

  • Primero: Hechar la gasolina o tiner en un envase de vidrio.
  • Segundo: Agregar pedasos de anime o plástico transparente y mover los ingredientes con la espátula de metal.
  • Tercero: Dejar reposar durante dos días (48 horas), hasta que el líquido tome una consistencia muy similar a un barniz.
Nota: Si desea que la resina quede más espeza tipo pegamento, solo debe agregar más anime o plástico.
FOTOGRAFÍA DE MIS MATERIALES YA PREPARADOS

alt

PROCEDIMIENTO PASO A PASO.

Aquí les muestro la emulción de la resina casera.

alt

Con una espátula, regué la resina casera en el soporte.

alt

Una mancha de color azul en la parte de arriba del soporte.

alt

Salpiqué pigmento, de color azul y rojo por todo el soporte.

alt

Volví a salpicar pigmento, esta vez, de color amarillo y acrílico blanco.

alt

La textura obtenida a continuación, fue lograda uniendo todo el salpicado de pigmentos de colores, con una espátula.

alt

Ahora, le toca el turno al pigmento de color negro.

alt

En la parte inferior de la obra coloque el pigmento de color negro y lo esparcí con un pincel N° 4, obteniendo lo que observan en la imagen.

alt

Con un pincel punta fina, hice las ramificaciones del árbol, ahora voy a hacer el follaje del arbusto, con una de mis espátulas.

alt

Sigo haciendo el follaje del árbol, pero en esta oportunidad trabajo la espátula con colores, amarillo y anaranjado.

alt

Observen el follaje, ahora estoy trabajandolo, con los colores, rojo, amarillo y anaranjado.

alt

Observa como va quedando.

alt

Observa la obra, desde una perspectiva un poco más alejada.

alt

DETALLES.

alt

MÁS DETALLES.

alt

MÁS DETALLES.

alt

Yo enseñando la obra terminada.

alt

La obra final, fue titulada:

El ave, mirando al frambollan en el tunel del tiempo.

alt

Bien, amigos, fue un placer haber demostrado en esta publicación, parte de mis trucos y conocimientos artísticos, que espero sea de utilidad, para todos los interesados, en aprender alguito del arte que yo conozco, y que les muestro en cada una de mis publicaciones, las cuales publico con mucho cariño para la plataforma digital de Hive, ya que me siento muy agradecido por el apoyo y la atención prestada.

¡LOS QUIERO MUCHOOOOOO!

ramaco54@ramaco54


Good morning to my friends from HIVE, your friend Ramaco, the painter from Cumaná, greets you from Cumaná, who brings you an artistic publication that I hope you like.

Welcome once again to the blog of:

<h1@ramaco54

Framboyan and the little bird ignoring the time tunnel.

alt

MATERIALS.

The materials I used to make this painting were: homemade resin, watercolor, acrylic, cardboard, palette knife, soft-cell brushes, and fine-tipped brushes.

HOME RESIN.

Homemade resin is prepared, with the following ingredients:
  • 1 liter of gasoline or thinner.
  • Anime or transparent soft drink container plastic.
  • A glass container.
  • A metal spatula.

Preparation.

  • First: Pour the gasoline or tinner into a glass container.
  • Second: Add anime or transparent plastic pieces and move the ingredients with the metal spatula.
  • Third: Let stand for two days (48 hours), until the liquid takes a consistency very similar to a varnish.
Note: If you want the resin to be more of a glue-like thickness, just add more anime or plastic.
PHOTOGRAPH OF MY PREPARED MATERIALS

alt

STEP BY STEP PROCEDURE.

Here I show you the homemade resin emulsion.

alt

Using a spatula, I spread the homemade resin on the support.

alt

A blob of blue at the top of the support.

alt

I splashed pigment, blue and red all over the support.

alt

I splashed pigment again, this time yellow and white acrylic.

alt

The texture obtained below was achieved by joining all the splashes of colored pigments, with a spatula.

alt

Now it's the turn of the black color pigment.

alt

In the lower part of the work, I placed the black pigment and spread it with a No. 4 brush, obtaining what you see in the image.

alt

With a fine tip brush, I made the ramifications of the tree, now I am going to make the foliage of the bush, with one of my spatulas.

alt

I continue to do the foliage of the tree, but this time I work with the spatula with colors, yellow and orange.

alt

Look at the foliage, I'm working on it now, with the colors, red, yellow and orange.

alt

Watch how it turns out.

alt

Look at the work, from a slightly further perspective.

alt

DETAILS.

alt

MORE DETAILS.

alt

MORE DETAILS.

alt

Me showing the finished work.

alt

The final work was titled:

The bird, looking at the frambollan in the time tunnel

alt

Well, friends, it was a pleasure to have demonstrated in this publication, part of my tricks and artistic knowledge, which I hope will be useful, for all interested, in learning a little about the art that I know, and that I show you in each of my publications, which I publish with great affection for the Hive digital platform, since I feel very grateful for the support and attention provided.

ramaco54@ramaco54

Cómo hacer un paisaje con resina casera. Por @ramaco54. | Ecency