virtual greetings to everyone

I am back with another interesting post that you need to know about and do on your own. Today I am sharing with you guys a simple process on how to change the sagging roof of any car.

Sagging roofs can occur in any car; most of the time, it may occur if you park your car for a long time in a higher temperature, so it is always advised to park your car in a shade.
It can also occur if the gum used in the roof material expires, and you will discover the roof will automatically fall.

In this case, the roof material has expired and the roof has sagged out of the board.

Now let's look at how to solve a sagging roof problem. The only way to solve the problem is to change the old one into a new one.

How can we go about that?

This is very simple. First, you need to loosen the roof from the car to where you want to get the work done, and also need to get a new roof fabric together with the original gum to gum the material to the board.

Before you apply the new roof to the board, you need to first prepare the board by removing the old roof material and the deposit form.

Here is the roof before

With the help of my hand, I pull off the old room fabric.

Although some parts of it are still strong to remove, I the do it slowly until I completely remove them all.

I have completely removed it, and if you look at the board, you will see some old deposits on it, which he removed so that it could gum well.

To remove the deposit material, I used an iron brush to sand it off.

This is not too easy to sand it off; it is really stressful.

After sanding it, I then used a broom to sweep out the foam. Finally, the board is ready to be worked on.

I then apply gum throughout the board.

making sure the gum is well applied so that it will not fall again.

I also apply gum to the roof fabric.

I then gum together; this is done very carefully so that the roof will be straight after gumming. I then open where we have held the roof.
Finally, the roof is now ready.