Updated: March 13, 2025
Original Document: Google Doc Link
Please do not do these experiments unless you are a trained professional or are with a trained professional. This coil has been known to output extremely high voltage under the right circumstances. This guide serves as a documentation of my work and establishes a way for researchers and engineers to try and replicate my results. Please be safe and don’t do this if you are unsure of your abilities to do these experiments in a safe controlled environment.
This guide is a work in progress and might need some revisions or additions.
The following technologies are hereby dedicated to the public domain under the CC0 1.0 Universal (CC0 1.0) Public Domain Dedication:
By placing these works in the public domain, we affirm that anyone is free to use, modify, distribute, and improve upon these technologies without restriction. No patents, trademarks, or other exclusive rights may be claimed on these designs. These innovations are meant to remain open-source and freely available to benefit all.
No Patents Allowed. Any attempt to patent or restrict the use of this work is against the spirit of open innovation and will be publicly challenged.
For more information, visit the Creative Commons CC0 page.
Original Document: Google Doc Link
It includes an indepth look along with extensive details of explaining the ideas behind the Bedini SG to a general reader.
Phase 2 testing was planned as an effort to combine two very easy and
common free energy devices into one simple design that could be utilized for practical applications in energy generation and battery desulfation(Rejuvenation of a dead battery).
Update: We have since pivoted and put the bedini circuit on the back burner for now as we have been focusing on a modified Joule Thief circuit that has been showing promising results).
John Bedini referred to the process of restoring a dead battery back to life as desulfation.
The Bedini SG Solid State circuit is essentially a system designed to charge batteries and extend their life using pulsed energy.
In simple terms:
So, the H-wave is crucial because it represents the form of energy that Bedini believed could efficiently charge and desulfate batteries without the typical resistance or energy losses of conventional systems.
Zoomed out waveform:
At first glance it appears to be similar to Bedini’s H wave. However, upon further inspection it is a partial H wave and is incomplete. Close, but not exactly what we are looking for.
Lets learn a bit about John Bedini’s theories of Back EMF and this H-Wave.
The H-wave is a concept John Bedini used in his energy work to describe a specific type of electrical waveform. In simple terms, it's a pulse of energy that behaves differently from the standard waves (like sine waves) that are typically used in electrical systems.
Here’s a breakdown of what the H-wave is about:
Unconventional Energy Flow: Instead of just flowing like a typical alternating current (AC) or direct current (DC), the H-wave involves a kind of sharp transient energy spike that Bedini believed could capture or release more energy than usual systems do.
Radiant Energy: Bedini associated the H-wave with “radiant energy,” a type of energy he claimed could be harnessed from the environment. When the H-wave occurs in his systems, it supposedly allows the device to draw in extra energy from an external source, like the vacuum or the environment, which isn’t fully accounted for by conventional science.
Energy Efficiency: Bedini's idea was that the H-wave could help his systems achieve what’s called over-unity (where the output energy seems to be greater than the input energy). He used this waveform to make devices like his battery chargers more efficient by pulsing energy in a way that was different from traditional methods.
In short, the H-wave is a type of pulse that Bedini believed could tap into hidden or unconventional energy sources, leading to more efficient or even excess energy production.
In John Bedini’s theories, he saw Back EMF (Electromotive Force)—which is typically regarded as a wasted byproduct in conventional systems—as a source of radiant energy. In standard electrical engineering, Back EMF is something to be grounded out or minimized, as it usually opposes the current in a circuit and causes energy losses, particularly in motors and inductive loads.
Back EMF = Radiant Energy: Bedini viewed Back EMF not as waste but as a form of radiant energy that could be harnessed. He believed this radiant energy came from the environment or the "vacuum" (what some refer to as zero-point energy).
H-Wave: The H-wave in Bedini’s systems is the manifestation of this radiant energy, particularly in the form of sharp pulses or spikes that occur when a coil (like in his motor or charger designs) is pulsed in a specific way. Instead of grounding out this energy as waste, Bedini designed circuits to capture and recycle it.
Harnessing the Energy: By using techniques to capture these Back EMF pulses, Bedini believed he could increase the efficiency of his systems, achieving what some would call over-unity (output energy greater than input energy). In practice, this meant using the sharp spikes of radiant energy from Back EMF—the H-wave—as a driving force for his motors or to charge batteries.
In summarizing most conventional systems waste Back EMF by grounding it, but Bedini saw it as a valuable form of radiant energy, which he called the H-wave. He built systems that could harness this energy rather than dissipating it, which he believed led to greater efficiency and potentially the tapping of additional energy from the environment.
In conventional science, Back EMF (Electromotive Force) is a voltage that opposes the current in a circuit. It happens mostly in devices like motors and coils, especially when there’s a change in the flow of electricity.
Here’s an analogy to make it easier:
Imagine pushing a child on a swing:
In simple terms:
When you run electricity through a motor or coil, that flow of electricity creates a magnetic field. When the motor or coil stops or slows down, that magnetic field collapses, and this collapse generates a reverse voltage (Back EMF). This reverse voltage pushes against the direction of the current, making it harder for the current to keep flowing.
In motors: Back EMF happens as the motor spins. The faster it spins, the more Back EMF is generated, acting as resistance to the power that’s driving the motor.
In inductors and coils: When you suddenly cut off the power to a coil (like turning off a switch), Back EMF is generated as the magnetic field around the coil collapses. It’s like the energy trying to "push back" as the flow of electricity changes.
In summary, Back EMF is an electrical "kickback" or resistance that occurs when the flow of electricity through a motor or coil changes.
When you pulse a coil, the rapid change in the electrical current flowing through it creates a magnetic field. As soon as you stop or change the current (like turning the pulse off or AC), that magnetic field collapses, which generates Back EMF—a voltage that opposes the direction of the original current.
Current flows through the coil: When you pulse electricity through a coil, it creates a magnetic field around it.
Pulse turns off: When you suddenly stop or reduce the pulse of current, the magnetic field around the coil begins to collapse.
Collapsing magnetic field generates Back EMF: As the magnetic field collapses, it creates a reverse voltage (Back EMF) in the coil, pushing against the direction of the original current. This happens because of Lenz's Law, which says that the induced current will oppose the change that caused it.
When coils are pulsed, the sudden change in current causes Back EMF, and that Back EMF opposes the original flow of electricity.
In most conventional systems, Back EMF is considered a nuisance, but Bedini sought to harness this Back EMF (and its radiant energy) instead of letting it go to waste.
In regular electrical systems:
Aether and Radiant Energy: In their theories, they often referred to an unseen medium called the aether, a sort of invisible energy field that surrounds everything.
Back EMF as Energy to be Harnessed:
How to debug my system:
Test for current on the charge battery by placing 1ohm resistor between positive and negative(replace battery) if you are getting current the system is not working and is leaking current somewhere(Diode, transistor etc):
More on the H wave by Bedini:
Common mistakes with the Bedini Monopole Flywheel:
Geralds Protection Circuit
Signal I get with Protection Circuit(Diode Only)
Custom Bedini SG Solid State Circuit w/ Simulator Link:
(Courtesy of Shanjaq): Falstad Link
The ABHA coil is a variation of the Rodin coil. Marko Rodin likes to call the Rodin coil, “The Flux Ruster Atom Pulsar Electrical Venturi Spacetime Implosion Field Generator Coil.”
While working with Marko, Randy Powell had discovered previously unknown number patterns hidden inside the vortex math number sequences. And the ABHA coil variation was born.
Phase 1 guide was about getting my feet in the water. It had some really amazing insights. However, it was riddled with misinformation and factual errors due to the way I was reading the current. It was not the correct way. Suffice it to say we have corrected these issues and have been getting some remarkable results.
In the world of fringe science, breakthroughs and suppression are two opposing forces. Those who challenge the status quo risk everything to uncover the truth. This guide is the beginning of your story."
(Mark 1 Coil)
Pre-Workshop Assembly Class:
https://www.youtube.com/live/xNm8iIcPt3I
Rodin coil workshop
https://www.youtube.com/live/eLdp7uOhMNA
To save me some time writing this guide I will post a link to the video I used to help me wind the Vortex coil. There are some minor details, tips, tricks and other information I will be including in my online workshop where I will be doing hands on classes with anyone interested in learning how to properly wind and configure their rodin coil for these purposes.
Poe Coil and how its made(Erica Nunez of 1stopenergies): YouTube Link Archive Link
At the end of the video its a bit confusing but essentially what you are doing is making two channels of 12 connected wires each in series from your 24 wire bundle. This gives you 12 winds clockwise and 12 winds counterclockwise(for the nunez method).
-Stereo amp receiver to supply the power and control the power level(Any will do with speaker wire output channels, however I am using an Insignia NS-R2001. You can also use a proper waveform generator if you have one available)
(Back of stereo amp)
Getting the exact measurements for this type of energy can be tricky. Therefore it is extremely difficult to actually gauge the efficiency of our system until we have better equipment available or have others replicate these tests.
By taking measurements with two multimeters, you can observe how the coil is affecting the signal. You may want to consider taking measurements at different frequencies or with different input voltages to see how the coil responds. A T-RMS(True Root Mean Square) Multimeter is highly recommended due to their accuracy at reading higher frequency voltage.
For this setup we use only a single channel(Although you can leave channel B connected to the load if you’d like. The right speaker out is the positive terminal and is the driving power. This red speaker wire goes to input on channel A of the coil(start of wire). The negative output for the return terminal on the receiver will go to Channel A output/finnish lead.
Increasing the frequency input by 1 hz for bigger coils and 1khz(Suspected) for smaller coils. My big coil amplifies magnetic fields at around 24 hz and produces a VERY strong synchronicity effect with a neodymium sphere at 7hz. I suspect the geometry of the torus and the geometry of the sphere complement each other's fields in just the right way. You can also input another channel from the stereo(Left speaker positive out to channel B input to the coil /negative on output of channel B of coill) to create an even stronger magnetic field.
The coil's ability to create a resonant circuit with the amplifier and tone gen may be what allows it to transfer energy through the circuit. It’s creating a perfect resonant cavity for the energy to “Slide” down the conductor in the path that it wants to go. In my experiment, I’m using an AC tone gen fed into the stereo receiver from my phone(you can use any input you like laptop, phone, waveform gen) to drive the coil, which, when tuned correctly, creates a resonant frequency in the circuit. This resonance may be what allows the energy to flow through the circuit, regardless of whether there is a detectable magnetic field or not. The energy is being “Pushed” at the height of its flow. Right as it starts to slow down, back and forth using a path that it wants to go naturally. The closer you get to this path, the more efficiency you should see. This also makes sense. What is the one defining variable that determines if a conductor can create a ‘detectable’ magnetic field? Geometry. By simply twisting the wire into a coil shape you can create a detectable magnetic field. Why not push this one step further and say lets create a more accurate path for that energy to flow. That is essentially what the Rodin coil is. An extension of what we already know to be true. Geometry is integral to quantum electrodynamics.
It's also worth noting that the Rodin Coil's claims are not universally accepted by the scientific community, and many experts have questioned its validity and functionality. With my experiments I hope to provide valuable insights into the coil's behavior, and it's clear that further research is needed to fully understand its mechanisms. This is where you all come in. We need people to try and replicate my research here. Which is also just an extension of Daniel and Erica Nunez work which has somehow been lost in time.
One of the most common mistakes I see with the Rodin coil is the assumption that it can operate effectively with a single channel. However, for optimal performance, it requires at least two channels. According to Daniel Nunez, energy should flow clockwise in one channel and counterclockwise in the other, with a 180-degree phase shift between them. This configuration generates two counter-rotating magnetic fields, which interact in a way that compresses and structures the coil's geometry, potentially leading to unique energy effects. He also mentioned the number of winds being significant and that having evenly spaced bundles such as a manufactured VGA cable will and I quote “Change everything”. If you look at Daniels advanced 432 coil it has multiple winds and channels but the wires are all evenly and delicately placed so that they are perfectly symmetrical. Perhaps this asymmetry or imperfection is what causes the ozone byproduct?
Another common mistake is that the wires in your bundle need to not only be twisted but soldered together in series. For my coil I have 12 wires in series for each channel(24 wires total). Although one did break due to microfractures in the manufacturing process that forced me to disconnect one from the second channel to balance the field. This led to my mark 1 coil actually having 11 wires per channel, 22 total instead of Daniels recommended 24. I can’t imagine what kind of efficiency we could get with all 24!
The Nunez patent discusses a coiled wire nest and frame for toroidal induction, which includes a vertically stacked coiled wire nest with identical layers. The patent states that the wire length and configuration of each stacked layer should be identical, and the distance between adjacent coiled wires should be identical.
Bundling the coil unevenly, and creating a loose wire or uneven bump in the bundle may affect the performance of the coil. The unevenness may cause the coil to vibrate or oscillate at different frequencies, which can lead to reduced efficiency or even failure of the coil.
In particular, the unevenness might cause:
The unevenness in the coil could cause the coil to resonate at two or more frequencies, which can interfere with each other and prevent the coil from resonating at a single frequency. This phenomenon is known as "multi-mode resonance" or "frequency splitting".
In a typical coil, you would expect it to resonate at a single frequency, known as the fundamental frequency, which is determined by the coil's geometry and the applied magnetic field. However, when there is unevenness in the coil, it might cause the coil to resonate at multiple frequencies, including higher harmonics or overtones.
These multiple frequencies would interact with each other in complex ways, causing the coil to behave differently than expected. In some cases, this can lead to reduced efficiency or even failure of the coil. For example, if the coil is designed to resonate at a specific frequency, but it's actually resonating at multiple frequencies due to unevenness, it may not be able to store energy efficiently. Remember, these coils act as a capacitor and transformer at the same time.
In addition, the interference between the different frequencies can also cause the coil to vibrate or oscillate at different frequencies, which can lead to increased heat generation, reduced efficiency, or even mechanical damage to the coil.
By ensuring that the coil is properly wound and bundled, with identical wire lengths and configurations in each layer, you can help minimize the effects of multi-mode resonance and ensure that the coil resonates at a single frequency. This is why precise control over the coil's winding and assembly process is critical for achieving optimal performance.
If you’re having trouble with your results or having inconsistencies try this:
Measuring the RMS voltage: Use a true-RMS multimeter or a digital oscilloscope to measure the RMS voltage of the AC signal. This will give you a more accurate measurement of the actual voltage.
Challenge of detecting a single monopole with a spinning magnetic field: With my traditional pole detector(Magnet on a hinge) all it does is spin inside the vortex. This makes it challenging if not impossible to actually tell if the Rodin coil is producing a single monopole as predicted by Daniel Nunez.
Use a different magnetic field detector: Consider using a different type of magnetic field detector that is better suited for detecting individual poles. Some options might include:
Analyze the magnetic field pattern: Study the magnetic field pattern created by the coil and try to identify the individual pole signatures. You might need to use specialized software or equipment to analyze the field patterns.
Experiment Design:
Title: Replication Experiment: Vortex Math Coil Design and Energy Transformation
Objectives:
Experimental Procedure:
Data Analysis:
Control Variables:
Null Hypothesis:
Significance Test:
Phase two is the development and implementation of practical applications of the coil for various everyday purposes. We will go over all the information including setup, maintenance and development.
Welcome back, fellow explorers! 🚀 In this guide, we’re diving into Phase 2 of ABHA coil research. If you followed the first guide, you know we’ve come a long way since the Nunez Method with the stereo receiver—and we’ve learned a lot (including what not to do). Let’s break it all down in a concise, fun, and easy-to-read way! 😎
The Lightning Thief is our modified Joule Thief circuit and the key to tuning the ABHA coil for practical use in off the grid lighting solutions. It is used to oscillate a DC signal with a transistor, boosting the voltage significantly while also recycling the Back EMF produced by the collapsing magnetic field. Back EMF is energy that is usually wasted due to its destructive nature. But instead of a Tsunami hitting the forward EMF, by resonating the back emf with the rest of the electricity, it reduces or eliminates the resistance. Allowing the Back EMF to flow freely and be turned into power. Akin to a surfer riding a wave to shore.
Here’s what you’ll need:
Parts:
Steps:
*While any Joule Thief can hum, achieving a humming light source means you've dialed in the circuit to a frequency where it's interacting with the bulb in a resonant way. Indicating peak efficiency and energy transfer! ✨
Tuning tip: Use an oscilloscope to monitor your coil’s resonance and waveform.
What we can accomplish with this method?
The Lightning Thief setup is highly versatile, and we’ve developed several exciting configurations(These have not been tested with the open circuit method yet):
Each configuration offers unique advantages depending on your goals. Experiment and find the one that works best for your project! 🌟
We experimented with stereo amp boards (like the Drok mini amp) and found some success using a 0.15µF capacitor to produce high voltage. Here’s how you can replicate our results:
Pro tip: Keep an eye on heat levels and ensure your setup doesn’t overheat. A properly made vortex coil should actually cool down after a certain threshold of voltage is input into the system. But don’t just assume your coil will do this. Take the proper precautions. Keep a fire extinguisher close by in your lab at all times and practice using it. Safety first! 🔥
Stereo Method Shown On Left:
Here’s where things get exciting! We’ve started detecting monopoles in the magnetic field produced by the ABHA coil. We will use the closed circuit stereo amp board method for this pseudo monopole. From my experience, there maybe certain frequencies that you can get the monopole and ones you don’t. I suspect this is due to imperfections in my coil leading to a ‘leaking’ of the north pole or the inner to outer diameter of the coil frames ratio being off(my current frame ratio 1:2 vs another ratio like 1:5 or golden ratio). Those are my two working theories.
Here’s how you can check for a Monopole in your system:
Tools:
Connection:
Steps:
What this tells us: Monopole behavior could explain some of the coil’s unique properties, like energy efficiency, its unique abilities such as acting like a 1:1 step up transformer, and it's strange waveforms. 🤔
Video of Monopole detection in my system:
🤯🧲Did I build a Magnetic Mono-Pole? |Holy Grail Physics| BeneficenceTV #rodincoil #vbm #vortexmath
We’ve explored using a magnetic rotary device to reduce input wattage requirements. Here’s the basic idea:(Coming Soon) This feature has been tested and we’ve experienced a reduction of input power by up to 30 watts.
Results so far: Significant drops in input wattage while spinning a neodymium sphere. Experiment with magnet spacing and RPM/Frequency for the best results. Specifically noticed a 30 watt reduction on input power requirement simply by spinning the neodymium sphere. 🌀
Micro Vortex Coil (Shown below) was not as efficient only reducing wattage by 1-2 watts at the same input power as the Mark 1.
Video of me using this method to reduce input wattage by 10 watts!(we’ve gotten that up to a 30 watt reduction):
Efficiency Gains with Magnetic| BeneficenceTV
In the course of testing various Rodin coil configurations, I uncovered what appears to be a new or unclassified type of electrical waveform—something that bridges the gap between traditional alternating current and modern pulsed DC systems. I’ve named it the Resonant Pulsed Waveform (RPW).
This waveform is not produced by standard AC methods, nor by typical PWM or pulsed DC techniques. Instead, the RPW is generated through the precise synergy between forward EMF and back-EMF, timed and tuned in such a way that a stable, resonant signal emerges throughout the entire system. It is further enhanced and shaped by the geometry of the coil—in this case, a Vortex-based structure.
Unlike sinusoidal AC (which is smooth and grid-driven) or pulsed DC (which abruptly switches on and off), the RPW is a synthetic, resonant waveform with three key characteristics:
These three features are present everywhere in the system. No matter where you probe—across the coil, load, ground, or even high-impedance points—the same waveform structure persists while floating the probe. This suggests a total-system harmonic resonance, where energy is not just flowing through, but circulating in phase-locked unity. (Floating the probe is required to get a full picture of the system. You can ground your Oscope signal and see the pulsed signal but this isolates the back emf component and you only see half of what’s actually going on. By floating the probe you don’t see a clean image but you see the whole interaction.)
The RPW was uncovered using a modified Joule Thief-style pulse generator (nicknamed the Lightning Thief) driving a Vortex coil with optimized geometry. By carefully timing the interactions between forward EMF (the drive) and back EMF (the collapse), when combined with the correct capacitance in the load(choosing your light to correctly match the system's impedance) the system entered a resonant mode that produced the unique RPW signature.
Key factors in the discovery:
The Resonant Pulsed Waveform offers possibilities not available with standard electronics:
It doesn’t just drive a load. It activates a field structure—one that seems to envelop and unify the entire system in resonance.
If replicated and refined, RPW systems could enable:
Achieving an RPW requires more than just a signal generator. It demands resonant geometry, perfected timing, and an understanding of EMF behavior. Even small deviations in frequency or core material can collapse the waveform into noise. But when it locks in—you’ll see it everywhere. The ubiquitous waveform is a tell tale sign you’ve just achieved synthetic AC.
The notorious H-Wave. Described by Bedini as an initial sharp transient spike followed by an h shaped wave. Can our Rodin coil produce a nearly perfect one on each axis? I’m not experienced enough reading wave forms to be able to determine that at this moment. If any of you knows the answer please reach out to me: **[email protected] **
Bedini Shows the H-Wave:
Our Signal:
Now you can see why I chose the Bedini SG as the perfect candidate for Phase 2. It already produces this H wave that I’m getting with my coil when it's in resonance. Keep in mind though, at the time of choosing this circuit I didn’t have access to an oscilloscope so I actually had NO IDEA that my system produced this H wave. I just had an intuition that it would complement my ZPE system. We have not started our actual testing with the Bedini SG. If anyone in the community gets on this project before I get a chance please update me so I can add your findings in this guide 🙂
How to understand why AC is more efficient at transmitting energy:
Imagine you have to transport water from one place to another using pipes. Now, if you were to push the water through the pipes constantly in one direction, it would require a lot of force and energy to keep pushing it the entire way. This is similar to direct current (DC), where the flow of electricity is in one direction.
But, if instead of constantly pushing the water in one direction, you could make it move back and forth, it becomes much easier to transport the water. You can use a pump that vibrates or oscillates, and the water moves forward and backward, making it easier to push through the pipes without using as much energy. This back-and-forth motion is similar to alternating current (AC), where the flow of electricity changes direction periodically. Like being pushed at the height of your arch when swinging on a swing.
Using alternating current in electrical systems is similar to the back-and-forth motion of the water. With AC, the electricity can move forward and backward rapidly, and this makes it easier to transform the voltage for efficient long-distance transmission. It allows us to increase the voltage for transmission, reducing energy losses and making it more efficient to deliver electricity to our homes, businesses, and Industries.
So, by alternately changing the direction of the current, we can make electrical transmission more efficient, just like how oscillating or alternating the water flow in the pipes makes it easier to transport. Using its own momentum to reduce resistance. Similar to the natural pendulum effect of a magnetic field. Just like a pendulum oscillating back and forth, AC uses its own momentum to reduce resistance and make the transmission of electricity more efficient. The alternating current creates a back-and-forth motion, which helps to overcome the resistance encountered during transmission. This allows for the energy to be transported over longer distances with fewer losses.
Magnetic field direction
The direction of the magnetic field can be influenced by the number of turns and the direction of the turns. For example, if the coil has an even number of turns, the magnetic field may be oriented in a specific direction, while an odd number of turns can result in a different magnetic field orientation.
Asymmetrical ratios of turns might indeed produce a second resonant frequency, which can have a significant impact on the overall behavior and performance of the system. This phenomenon is often referred to as "frequency splitting" or "harmonic resonance."
When the coil's turns are not perfectly symmetrical, it can create a situation where the magnetic field is not perfectly aligned with the coil's axis. This can lead to the creation of a secondary resonant frequency, which is not present in a perfectly symmetrical coil. This secondary frequency can interact with the primary resonant frequency, causing the system to behave in unexpected ways.
The effects of frequency splitting can be far-reaching:
In the annals of scientific history, the luminiferous Aether once reigned supreme as the mysterious medium through which light waves were believed to propagate. However, a controversial theory posits the existence of a conspiracy to eliminate the aether from scientific legitimacy, with Albert Einstein emerging as a central figure in this narrative.
According to this alternative perspective, the luminiferous Aether, a cornerstone of many groundbreaking theories and inventions of the past, was systematically dismissed and discredited through the efforts of a shadowy cabal within the scientific establishment. Einstein, heralded as a scientific genius and innovator, is speculated to have played a pivotal role in crafting a new narrative that replaced the aether with imaginary particles and mathematical constructs.
The Michelson-Morley experiment, long heralded as the death blow to the luminiferous ether theory, is reexamined through this lens as a strategically engineered experiment designed to discredit only one proposed theory of the aether, while other viable theories were ignored and forgotten. This selective dismissal of alternative theories and the emphasis on theoretical constructs over empirical evidence raises provocative questions about the nature of scientific inquiry and the influence of historical biases on our understanding of the universe.
As we grapple with the complexities of scientific progress and the interconnected web of theories, experiments, and societal influences that shape our knowledge, the tantalizing possibility of a hidden agenda to suppress the luminiferous Aether theory challenges us to reconsider the foundations of modern science and the narratives that guide our exploration of the unknown.
Two counter rotating magnetic tesla fields synchronized to the vibrational frequencies of the earths magnetosphere combined with a capacitor wrapped in a transformer type tesla coil but in the shape of a sacred geometric toroid to eliminate any resistance to flow at an atomic level.
The Dolard/Tesla method of just using the same weight for the same material Cross hitch/clockwise and counterclockwise rodin coil wind seems to produce a stronger electromagnetic
field.
Sphere rare earth magnet in center of vortex coil a cylindrical coil and placed around spinning magnet - not counting power from the wall, the multimeter on cylindrical coil = more voltage than went in.
DC provides a south pole and a void with no north pole AC provides two south poles at the center/vortex and no north pole
Two coils hooked up in parallel will destroy the second coil
high voltage may produce white powder in center indicating high ozone production Caution is advised.
Incite(The major leap here that needs to be done, is the proper engineering of the cabling. Right now it's
just a rough bundling of wire.
Ordered, precisely spaced wire in a cable, that is used for the wrapping will change everything. Think of the way VGA cables are.
(This is why I believe the Version 3 Advanced POE coil frame will be the most efficient if we can get someone to help us reconstruct one)
Fractal physics of charged distribution is the key to vacuum zero point coherence and negentropy. All vacuum coherence technologies require fractal conjugate charged symmetries to implode the surrounding "ether" which is a superfluid charged media to the point of negentropy(Self-organization).
"Free energy is just a threshold of distribution efficiency from the superfluid zero point vacuum." paraphrase Dan Winter
What if this system is closing off the inflow to the ether and allowing zero point energy to flow into the system allowing it to maintain or increase the current? We already know that a transformer can step up voltage based on the number of winds it has in its secondary coil. This coil essentially acts as two coils combined into a 1:1 transformer. Perhaps the geometry is close enough to achieve this 1:1 transformer effect? Mark Rodin says that radiant energy travels in the opposite direction of magnetic flux. In Marko Rodin's fingerprint of god diagram we see that zero point energy is activated by the synergy between two positive to one negative or two negative to one positive in the form of 3,9,6(-,+,-)(+,-,+). What is the relationship of this to the coil’s ability to achieve its remarkable abilities? As I understand it, Tom Bearden described over-unity being achieved by a system of uneven stability or asymmetry. -,+,- / +,-,+
ADDENDUM: We were completely wrong!
I was able to achieve the Nunez open circuit method by attaching a .15uF 2000HV Tesla Cap to the coil in parallel with the load. This was able to excite 5 neon lamps!!! My coil apparently doesn’t act that differently at all. I just had the system configured incorrectly. Once we straightened out a couple of issues it all worked perfectly and as expected. Regarding Daniel Nunez claims, most of the stuff that I've looked into turned out to be factual. We did produce a monopole. But we also are getting unusual effects that Daniel did not experience. We got a north pole at certain frequencies. Perhaps he didn’t detect it but it was there? Or perhaps the micro imperfections within my coil are actually causing it to behave slightly differently.
Video of me exciting 5 neon lamps with only about 18 volts!!
High Voltage Academy | BeneficenceTV #Rodincoil
The laws of thermodynamics, specifically the first and second laws, are indeed formulated for closed systems. A closed system is a system that has no exchange of matter or energy with its surroundings. Think of a thermos flask: it's a container that keeps its contents (like hot coffee or tea) isolated from the outside environment.
On the other hand, the universe is not a closed system. It's an open system because it's constantly exchanging matter and energy with itself. The universe is expanding, and new matter and energy are being created in the form of stars and galaxies.
The problem is that the laws of thermodynamics were developed for closed systems, where entropy (a measure of disorder or randomness) always increases over time. In an open system like the universe, this isn't necessarily true.
Here's an analogy to help illustrate this:
Imagine a deck of cards. In a closed system (like a deck in your hand), when you shuffle the cards, they become more disorganized and random (increased entropy). But if you add new cards to the deck (analogous to new matter and energy entering the universe), the overall organization and structure of the deck can actually increase (like a new card becoming part of a previously non-existent sequence).
In the same way, in an open system like the universe, new matter and energy can bring about increased organization and structure, which would seem to defy the second law of thermodynamics.
However, it's not exactly a contradiction because the universe as a whole is still subject to the laws of thermodynamics. The increase in organization and structure occurs at a smaller scale (like on Earth or within galaxies), while the universe as a whole continues to expand and cool, following the second law.
Think of it like a cosmic seesaw: while local structures within the universe might become more organized, the universe as a whole is still subject to entropy's gradual increase.
I believe based on the researched theories of the aether, that perhaps plastic is not the material we would need to produce magnetic synchronicity between the rodin coil field and the neodymium sphere. This explains why all the videos I've seen of this effect use a glass cup. Apparently, there is a theory that glass is able to amplify the aether energy more like an antenna than the plastic inside the cup I was using. Will be testing this in a safe way soon. My research partner and I have also come to the conclusion that we may need a specific design for our vortex coil to be able to fully synchronize with the sphere. Specifically we may need at least 3 channels to accomplish this.
We all but confirmed this in a live stream where we noted a significant reduction in power/RPM for the neodymium sphere in a plastic cup vs at the same power level it spun like crazy inside the glass cup. This could be evidence that glass is a natural amplifier of the Aether interactions.
If thermal reduction is in fact practical at higher voltages for this coil design. Think about the applications:
Replacing this extremely loud, hot, inefficient and expensive transformer
With this simple design that is cost effective, compact, self-cooling and extremely efficient!
Stay curious, stay creative, and keep pushing the limits of what’s possible. 🌌 Happy coiling!
-The Benefactor(Ben E. Factor)
Fireball Coil(Spool and Bundle) Tutorial: FireBall Coil Video
Pre-Assembly Coil Frame Full Class: Coil Frame Assembly Video
https://www.youtube.com/live/xNm8iIcPt3I?si=VPaOoilxbs3N5Q6K
Coil Class Full Live Stream: Rodin Coil Workshop Video
https://www.youtube.com/live/eLdp7uOhMNA?si=WNnqDQvZnf6EMLII
Lightning Thief Circuit(Michels Modified Joule Thief): Michel's Modified ABHA Excitation Circuit: | BeneficenceTV
Full Lighting Thief Breakdown and Demo:
Full Lightning Thief Breakdown/Demo | BeneficenceTV
How to increase efficiency with LT PCB:
LT Increasing Efficiency with PCB | BeneficenceTV
