Electroplating process

marlon82(57)
Published in
#job
Words
168
Reading
1 min
9y
Listen to this post
~1 min

Hello fellow steemians ,
Today I posted about my job, electroplating,

Electroplating means a process of applying a thin film of metal by means of electrochemical process. Electrochemical because it is concerned with electrical energy and chemical energy.

before plating first im going to clean the items then put an auxiliary cathode to prevent pittings.

IMG20171104090556.jpg

IMG20171104093536.jpg

Then hang up in the plating rod

IMG20171104103726.jpg

Then soaked in the alkaline cleaner for about 10 to 15 minutes .alkaline used to removed oil and buffing residues.Then placed the into electrolytic cleaner, electrolytic cleaner used also to removed oil and buffing residues by means of electricty. After then rinse with 5% solutions of sulfuric acid for totally cleaned all the items.
All items are totally cleaned then start to nickel plating.
IMG20171104105242.jpg

After 15 minutes all items are now nickel plated.
IMG20171104110414.jpg

removed all the auxiliary cathode,then continue to silver plating and sealer chromate.
IMG20171104112005.jpg

Finished plating on nickel and silver
IMG20171104112435.jpg

IMG20171104112759.jpg

Thank you to all my fellow steemians,I hoped learned something about my job, about electroplating.

marlon82-1.jpg

Electroplating process | Ecency