*** BIENVENIDOS A MI BLOG ***
Hola, hola comunidad de #Hive y est谩 hermosa comunidad de #Jewelry deseo se encuentren todos bien con entusiasmo y buena vibra en esta mitad de semana que tenemos ya, deseando que est茅 mes este lleno de muchas bendiciones en todos los aspectos, que puedan disfrutar de unas buenas festividades navide帽a 馃巹, nuevamente por ac谩 con ustedes compartiendo un hermoso proyecto como lo es un bello par de aretes o pendientes en alambrismo con perlas y cristales, un procedimiento f谩cil de realizar pero el resultado es bell铆simo,un buen accesorio como los aretes o pendientes siempre son indispensable en el oufith de una mujer y los elaborados con perlas o cristales dan ese toque elegante a la hora de usarlos, asi que sin mas los invito a visitar mi blog y ver el paso a paso para realizarlos.
*** WELCOME TO MY BLOG ***
Hello, hello #Hive community and this beautiful community of #Jewelry I wish you all well with enthusiasm and good vibes in this half week that we have already, wishing that this month is full of many blessings in all aspects, that you can enjoy a good Christmas festivities 馃巹, again here with you sharing a beautiful project as it is a beautiful pair of earrings or earrings in wire wrap with pearls and crystals, an easy procedure to perform but the result is beautiful, a good accessory like earrings or earrings are always indispensable in the oufith of a woman and those made with pearls or crystals give that elegant touch when wearing them, so without further ado I invite you to visit my blog and see the step by step to make them.
Materiales a utilizar
鈽戯笍 Alambre tpc No 20.
鈽戯笍 2 perlas acr铆licas No 10.
鈽戯笍 20 Balines No 3 en Goldfield.
鈽戯笍 16 Cristales blancos No 4.
鈽戯笍 4 cristales transparentes No 4.
鈽戯笍 Pinza punta redonda.
鈽戯笍 Pinza punta plana.
鈽戯笍 Pinza piqueta.
鈽戯笍 Lima de u帽as.
鈽戯笍 Cinta m茅trica.
Materials to be used
鈽戯笍 No 20 tpc wire.
鈽戯笍 2 No 10 acrylic beads.
鈽戯笍 20 No 3 Goldfield pellets.
鈽戯笍 16 No 4 white crystals.
鈽戯笍 4 No 4 clear crystals.
鈽戯笍 Round tip tweezers.
鈽戯笍 Flat tip tweezers.
鈽戯笍 Pickaxe tweezers.
鈽戯笍 Nail file.
鈽戯笍 Tape measure.
Tutorial o paso a paso.
Comienzo haciendo un peque帽o doblez en la punta del alambre y aplano bien con la pinza punta plana, luego introduzco un bal铆n seguido de un cristal blanco No 4,dejo aproximadamente 1 cm y pico el alambre, luego realizo un arito o lub para asegurar el cristal y el bal铆n,as铆 engarzo 16 cristales blancos y 4 transparente( 1 al 6).
Tutorial or step by step.
I start by making a small bend in the tip of the wire and flatten well with the flat tip tweezers, then I introduce a pellet followed by a white crystal No 4, I leave about 1 cm and pick the wire, then I make a ring or lub to secure the crystal and the pellet, so I crimp 16 white crystals and 4 transparent (1 to 6).
Luego paso a realizar la base de los aretes o pendientes en alambre tpc, con la parte mas finita de la pinza punta redonda realizo un aro o lub dejando en un extremo un aproximado de 1 1/2 cm que va a ser el clavito de la base, luego con la pinza plana y los dedos comienzo a girar hasta realizar 6 vueltas, corto el alambre dejando un pedacito para realizar un aro o lub, luego repito el mismo procedimiento para la otra base y ya estan listas (7 al 12).
Then step to make the base of the earrings or earrings in tpc wire, with the thinnest part of the round tip tweezers I make a ring or lub leaving at one end about 1 1/2 cm that will be the nail of the base, then with the flat tweezers and fingers start to turn to make 6 turns, cut the wire leaving a little piece to make a ring or lub, then repeat the same procedure for the other base and they are ready (7 to 12).
Luego introduzco la perla en el alambre y dejo 1 1/2 cm de alambre libre y rodeo la perla con el alambre hasta completar 2 vueltas, la primera vuelta la realizo por la parte de adelante de la perla y las otra por la parte de atr谩s rodeando el alambre, doy dos vueltas en el alambre en la parte de arriba y corto, aplano bien con la pinza punta plana, realizo ese paso en el otro arete, luego empiezo a introducir los cristales previamente engarzados hasta completar 10 en cada arete , realizo un aro o lub con la pinza redonda y lo uno a la base, repito el proceso en el otro ,limo las puntas del alambre que va a la oreja, coloco las tapitas y verifico que este todo bien y as铆 doy por terminado este hermoso proyecto ( 13 al 20).
Then I introduce the pearl in the wire and I leave 1 1/2 cm of free wire and I surround the pearl with the wire until completing 2 turns, the first turn I make it by the front part of the pearl and the other by the back part surrounding the wire, I make two turns in the wire in the top part and I cut, I flatten well with the flat tip pliers, I make this step in the other earring, then I begin to introduce the crystals previously crimped until completing 10 in each earring, I make a ring or lub with the round pliers and I join it to the base, I repeat the process in the other one, I file the ends of the wire that goes to the ear, I place the caps and I verify that everything is well and thus I finish this beautiful project (13 to 20).
Espero haya Sido de su agrado este bello trabajo esperando estar muy pronto nuevamente con ustedes , todas las fotos son de mi autor铆a @Lupasbra21 fueron tomadas con mi tel茅fono inteligente Redmi 9, utilic茅 la aplicaci贸n polish para la edici贸n de fotos y us茅 el traductor Deepl translate.
I hope you liked this beautiful work and I hope to be with you again very soon, all the photos are of my authorship @Lupasbra21 were taken with my smartphone Redmi 9, I used the polish application for photo editing and I used the translator Deepl translate.