Since the third generation, Fujifilm X cameras feature a film simulation mode named “Eterna”. It’s a lower contrast, lower saturation profile which, with its subdued colors brings a strong cinematic look. It quickly became favorite among the Fujilovers, but alas… I have X-T20, second generation without that simulation. What can be done?
Well, you can download a free version of Capture One Express program for Fuji users, and shoot RAW (RAF in Fuji dictionary). Then you can implement any profile on your computer. Except Eterna Bleach Bypass. It is too new. Well, we know how it looks, and while we are waiting for the new version of Captue One Express, we can emulate it ourselves. Follow me, please…
Back in film days, Bleach Bypass was an effect created in the photo lab using chemical manipulation. It was enabled with a skipping of the bleaching phase while processing a color film. That way, the silver is retained in the emulsion along with the color dyes. That’s why you will find the same process under a name “silver retention”. The result is a black-and-white image over a color image, with reduced saturation, reduced exposure latitude, ie. increased contrast, and looking a bit underexposed. Not a biggie for a digital technology, right? You can do a similar thing in Photoshop… if you have enough money for it. In that case, you put a black/white version of a photo over the color original, and chose “Overlay” blending mode.
It usually is used to maximum effect in conjunction with a slight underexposure. How does it look? Have you seen the movie “300”?
There you go. Eterna Bleach Bypass in use. Now, you may find description of Fujifilm’s film simulations al over the Internet, albeit without Eterna and Eterna Bleach Bypass… Or for example here… and also here… Eterna and Eterna Bleach Bypass are so new that they did not made in the text reviews so far. That’s why we have this quick tutorial.
We’ll use the quickest and cheapest possible setup for this tutorial. And you can do it even if you do not have Fujifilm camera. First, download an excellent free Faststone image viewer, open your photo in it, go to menus and click Colors/Adjust Lighting (Ctrl+T), and then play with the sliders… Here are our models Nenad and Katarina
If you want to change the tone of your photo, you can use Colors/Adjust Colors (Ctrl+E), and then use HUE slider, or a separate sliders for the RGB color channels.
Here you can see three samples: Provia simulation as it came out of my X-T20 in the middle, and two examples were set above and below, so they could be easily compared to the original. Classic Eterna profile has lower contrast, lower saturation, for a natural cinematic impression, while Eterna Bleach Bypass has higher contrast, lower saturation, with the strong ‘old age’ or ‘historic’ look:
Eterna (cinematic) film simulation (contrast -10, saturation -20, highlights -20)
Provia (standard) film simulation (contrast 0, saturation 0, highlights 0)
Eterna Bleach Bypass film simulation (contrast +30, saturation -40, highlights -20)
If it is easier to see the distinctions in a table…
| Eterna BB | Provia | Eterna |
|---|---|---|
| contrast +30, saturation -40, highlights -20 | contrast 0, saturation 0, highlights 0 | contrast -10, saturation -20, highlights -20 |
Pros for this process are obvious:
On the Contra side, we only have one serious point:
You know, whenever you start playing, you can exaggerate to the limit of good taste. User, be aware! You are on your own, left to your level of creativity only. Good luck! 😊
