3 - 5 - 9 - Camera Rotation Light Painting on Hive

Words
928
Reading
5 min
Listen
Play
4y

ROTATE THE CITY LIGHTS

I was with stepko@stepko in Berlin's government district to take some camera rotation pictures. In most cases I rotate the camera at 30°, 45°, 60° or 180°. The smallest mark on the camera rotation tool is 15°. I have now added a digital tilt sensor to the tool so that I can also set angles that do not represent an even number of steps.

Ich war mit stepko@stepko im Berliner Regierungsviertel unterwegs um einige Camera Rotation Bilder aufzunehmen. In den meisten Fällen rotiere ich die Kamera mit 30°, 45°, 60° oder 180°. Die kleinste Markierung am Camera Rotation Tool ist 15°. Ich habe jetzt zusätzlich einen digitalen Neigungssenor am Tool angebracht um auch Winkel einstellen zu können, die keine gerade Anzahl an Schritten darstellen.

003_2623_v1.jpg
📷 Nikon D750 - Nikkor 17-35/2,8 - f11 - ISO 50 - 174 seconds

With five steps, the angle is 72° each. So I started the recording. The tilt sensor showed 0°. After a few seconds, I covered the lens and turned the camera until the tilt sensor showed 72°. I covered the lens again and set the sensor back to 0° with the "ZERO" button. Then I turned another 72°. I repeated the steps until I had taken 5 steps. The "ZERO" function saves me having to calculate. With 72° it is still quite easy, but with 7, 9 or 11 steps it becomes a bit more difficult.

Bei fünf Schritten beträgt der Winkel jeweils 72°. Ich startete also die Aufnahme. Der Neigungssensor zeigte 0°. Nach einigen Sekunden deckte ich das Objektiv ab und drehte die Kamera bis der Neigungssensor 72° anzeigte. Ich deckte das Objektiv wieder ab und stellt den Sensor mit der Taste "ZERO" wieder auf 0°. Dann drehte ich um weitere 72°. Ich wiederholte die Schritte bis ich 5 Schritte aufgenommen hatte. Die "ZERO" Funktion ersparrt so das Rechnen. Bei 72° ist das zwar noch recht einfach, aber bei 7, 9 oder 11 Schritten wird das dann etwas schwieriger.

003_2620_v1.jpg
📷 Nikon D750 - Nikkor 17-35/2,8 - f11 - ISO 50 - 49 seconds

I can also set the 120° for three steps without the tilt sensor. I set the rotation tool to 60° and then take two steps at a time until I uncover the lens again.

Die 120° für drei Schritte kann ich auch ohne den Neigungssensor einstellen. Ich stelle das Rotation Tool auf 60° und mache dann jeweils zwei Schritte bis ich das Objektiv wieder aufdecke.

003_2622_v1.jpg
📷 Nikon D750 - Nikkor 17-35/2,8 - f11 - ISO 50 - 215 seconds

For this picture I set the steps of 40° again with the tilt sensor, as already described above.

Für dieses Bild habe ich die Schritte von 40° wieder mit dem Neigungssensor eingestellt, so wie bereits oben beschrieben.

003_2616_v1.jpg

This is what the scene looks like without rotations. I took the picture near the Berlin government quarter. In the picture you can see the Kronprinzenbrücke over the Spree and the crossing Kapelle-Ufer / Reinhardtstraße.

So sieht die Szene ohne Rotationen aus. Das Bild habe ich in der Nähe das Berliner Regierungsviertels aufgenommen. Im Bild ist die Kronprinzenbrücke über die Spree sowie die Straßenkreuzung Kapelle-Ufer / Reinhardtstraße zu sehen.

003_2617_v1.jpg
📷 Nikon D750 - Nikkor 17-35/2,8 - f11 - ISO 50 - 39 seconds

img_20220418_113242_v1.jpg

img_20220418_113304_v1.jpg

I particularly like the fact that the display is automatically rotated. So the numbers are always legible without much contortion.

Besonders gefällt mir, dass das Display automatisch gedreht wird. Die Zahlen sind also immer ohne große Verrenkungen lesbar.

img_20220418_113337_v1.jpg

To attach the tilt sensor I printed a simple holder on the 3D printer. Magnets are built into the lower part of the sensor. For my application, however, this is not much use. The rotation tool is completely made of aluminium. Alternatively, you could also attach a sheet of metal or a thin magnet to the top of the rail and use it to attach the sensor to the tool.

Um den Neigungssensor zu befestigen habe ich einen einfachen Halter auf dem 3D Drucker gedruckt. Im unteren Teil des Sensors sind Magneten eingebaut. Für meinen Anwendungsfall nutzt das allerdings nicht viel. Das Rotation Tool ist komplett aus Aluminium. Man könnte alternativ auch ein Blech oder auch einen dünnen Magneten oben auf der Schiene anbringen und den Sensor damit am Tool befestigen.

divider_1.png

WHAT IS LIGHT PAINTING?

Light painting is a unique form of art. The darkness is illuminate by the artist with diverse light sources and light traces are paint into the picture with various light tools. Various techniques are use, such as camera rotation or other movements of the camera during the exposure. The creative possibilities are almost unlimited. All the pictures were taken during one single exposure. Apart from denoising, sharpening, cutting and possibly adjusting the white balance, the pictures are not processed on the computer.

divider_1.png

LICHTKUNSTFOTO

If you like my art visit www.lichtkunstfoto.de for more Light Art Photography and informations about Light Painting. Join me on Flickr Twitter

divider_1.png

cover.jpg

divider_1.png

For more great Light Art Photography, Light Painting and inspiration check these light painters: marlasinger666@marlasinger666 fadetoblack@fadetoblack fastchrisuk@fastchrisuk dawnoner@dawnoner oddballgraphics@oddballgraphics martbarras@martbarras stepko@stepko rod.evans.visual@rod.evans.visual yo-hoho@yo-hoho maxpateau@maxpateau gunnarheilmann@gunnarheilmann neilru75@neilru75 maximepateau@maximepateau ryuslightworks@ryuslightworks lightstabeu@lightstabeu candelart@candelart lacelight@lacelight

divider_lp_1.png

WE ARE LIGHT PAINTERS

To help and support the LightPainters community here on Hive I would appreciate your delegation of HivePower. Any amount is appreciated. It does not require much to get started, we are happy for any gesture. lightpainters@lightpainters

How to delegate?
Delegate 50HivePower, [50HP]
Delegate 250HivePower, [250HP]
Delegate 500HivePower, [500HP]
Delegate 1000HivePower, [1000HP]
All the Hive Power will help to upvote the artist's contribution as part of the LightPainters community.

3 - 5 - 9 - Camera Rotation Light Painting on Hive | Ecency