Hive, ¡ay, hive de mi corazón!, Hive que me ha dado tanto, amistades, conocimientos, moneycito...
Estoy emocionada de mostrarles el proceso que seguí para crear el llavero que se ha convertido en mi favorito.
Hive, oh hive of my heart, Hive that has given me so much, friendships, learning, and money.
I am excited to show you the process I went through to create the keychain that has become my favorite.
🐝 Fieltro rojo
🐝 Fieltro blanco
🐝 Fieltro Amarillo
🐝 Fieltro negro
🐝 Hilo de coser
🐝 Aguja
🐝 Tijera
🐝 La lana (algodón, guata o relleno)
🐝 Red felt
🐝 White Felt
🐝 Yellow Felt
🐝 Black felt
🐝 Sewing thread
🐝 Needle
🐝 Scissors
🐝 Wool (cotton, wadding, or padding)
🐝 Paso 1:
- Elaboración de los patrones
🐝 Step 1:
- Making the patterns
🐝 Paso 2:
- Marco primero el hexágono que es como la base del logo de Hive, dos piezas de color blanco. Uno las dos piezas con el hilván y añado el relleno y la cinta. (Me olvidé de la cinta, si no al final es que me acordé de la cinta y tuve que descoser un poco 😕)
🐝 Step 2:
- I mark first the hexagon which is like the base of the Hive logo, two pieces of white color. I join the two pieces with the basting stitch and add stuffing and a ribbon. I forgot about the ribbon, if not at the end it was that I remembered about the ribbon and I had to unpick a bit. 😕
🐝 Paso 3:
- Marco los patrones de los logos, dos piezas rojas de cada uno, ya que los pegaré por ambos lados. En este paso utilice la puntada de sobrehilado.
🐝 Step 3:
- I mark the logo patterns, two red pieces of each, as I will be gluing them on both sides. In this step use the overcasting stitch.
- Fácilmente mi hermoso llavero Hive está listo. Bueno, fácil es, pero un poco tedioso coser cada pequeña parte. Una cosa que me pasó mientras hacía el llavero... Tengo hilo de coser de todos los colores, como me gusta esto de hacer llaveros con fieltro, compré los materiales necesarios como fieltros, agujas, e hilos, y resulta que mágicamente el hilo rojo desapareció, todos los colores habidos y por haber, menos el rojo que era necesario para este llavero. La mayoría de las veces, hago mis manualidades por las noches después de hacer todos los quehaceres, ya había empezado a hacer el llavero, ya estaba estresada por no conseguir el hilo rojo, así que terminé usando el hilo blanco, se me prendió el foco y pinté el hilo con un marcador rojo, lo siento, no podía esperar hasta el día siguiente para comprar otro hilo rojo. Ahora con mi bonita anécdota, os dejo con el resultado.
- Easily my beautiful Hive keychain is ready. Well, easy it is, but a little tedious to sew each little part. One thing that happened to me while making the keychain... I have sewing thread of all colors, as I like this to making keychains with felt, I bought the necessary materials such as felts, needles, and threads, and it turns out that magically the red thread disappeared, there were all the colors there were, except the red that was necessary for this keychain. Mostly, I do my crafts in the evenings after doing all the chores, I had already started to make the keychain, already stressed about not getting the red thread, so I ended up using the white thread and I turned on the light bulb and painted the thread with a red marker, sorry, I could not wait until the next day to buy another red thread. Now with my nice anecdote, I leave you with the result.
Para acompañar el logo de Hive hice una abejita muy linda, la abejita que representa a todos los excepcionales Hivers que forman parte de esta colmena.
To go with the hive logo I made a cute little bee, the little bee that represents all the exceptional hivers that are part of this hive.
🐝 Paso 1:
- Marco los patrones, dos piezas amarillas. Empiezo cosiendo el abdomen de la abejita, uno con la puntada sobrehilado, introduzco el relleno y termino por coser.
🐝 Step 1:
- I mark the patterns, with two yellow pieces. I start by sewing the abdomen of the little bee, one with the overcasting stitch, insert the stuffing and finish by sewing.
🐝 Paso 2:
- Continúo con la cabeza y pego las antenitas. Añado el relleno y, con la cabeza lista, la uno al abdomen..
🐝 Step 2:
- I continue with the head and glue the little antennae. I add stuffing, and with the head ready, I join it to the abdomen.
🐝 Paso 3:
- Sigo con las rayitas y aguijón.
🐝 Step 3:
- I continue with the dashes and stinger.
🐝 Paso 4:
- Marco las alas y las coso obviamente por la parte de atrás y también coso la tira para colgar.
🐝 Step 4:
- I mark the wings and sew them obviously on the back and also sew the strip for hanging.
🐝 Paso 5:
- Para terminar le pego los ojitos con silicona caliente y le hago la boquita con hilo.
🐝 Step 5:
- For the end, I glue the little eyes with hot silicone and make the little mouth with thread.
Seguro que les ha gustado, ¿no? A mí me encantó, enamorada de mi nuevo llavero. Estaré encantada de leer y responder a sus comentarios. Gracias totales a todos los que aprecian mi contenido, y que se toman el tiempo de leer y dejar un comentario, gracias, muchas gracias. Les deseo lo mejor.
Hasta pronto.
I'm sure they liked it, didn't they? I loved it, in love with my new keychain. I will be happy to read and respond to your comments. Total thanks to everyone who appreciates my content, and who takes the time to read and leave a comment, thank you, thank you very much. I wish you all the best.
See you soon!
Otros trabajos con fieltro :
| DIY- Stitch keychain ENG/ESP | DIY- Mickey Mouse keychain ENG/ESP | [ENG/ESP] DIY - Tutorial Llavero y monedero Frida Khalo | DIY- Monster keychains ENG/ESP |
|---|---|---|---|
Fotografías de mi propiedad tomadas con el celular Redmi note 8 pro, editadas en canva
Traducción realizada con la versión gratuita del
traductor DeepL
Todos los diseños fueron creados en canva
Photographs of my property taken with the Redmi note 8 pro cell phone, edited in canva
Translation made with the free version of
translator DeepL
All designs were created in canva