A plain trouser (pants) for men

needlework

Greetings to Needle and treat community for there efforts towards this wonderful group an making it convenient for All of us.
This is my second post on Needle an treat community,
I will be discussing how I started a projects of making a PLAIN TROUSER(pants) for men.
The name of the material I used is black Cashmere

Step 1(CUTTING)
I fold the material into two Mark my waist line, crouch line, hip line, kneel line then full length
I divide the waist by 4 plus 1inch sewing allowance
I used my waist divide by 4 to get my crouch line.
Hips divide by 4
Kneel divide by 2
Full length. .
After cutting the trouser it will be in 4 pieces. 2 for the front while 2 for the back
Normally the back side is bigger than the front because of the back hip

Step 2

Cutting the front pocket lining and fixing the pockets

Step 3
Fixing the zip with the zip flap on the crouch line.
Stitch the down part after fixing the zip with the zip flaps.

Step 4
Stitch half inch for the darts.
Then stitch the back side with the front side of the trouser starting from the waits lines down.
Repeat the same in the other sIma