Two old pumps water pumping water into bucket. As you can see we have a vintage gas engine running with rubber belt. Belts are the cheapest utility for power transmission between shafts. This belt is a loop of flexible rubber belting relies on friction to operate, but excessive friction wastes energy and rapidly wears the belt.
Factors that affect belt friction include belt tension, that’s why you see most engines on wheels. Just move it to get the right tension. That’s not the only way belts wear, contact angle, and the materials used to make the belt and pulleys. Flat belts also tend to slip on the pulley face when heavy loads are applied. Flat belts were widely used in the 19th and early 20th centuries.
Pulleys were made with a slightly convex surface to help because flat belts tend to climb towards the higher side of the pulley. By having a crowned surface rather than flat, allows the belt to self-center as it runs.
I think its great that we have people that keeping this pump and engines running for others to see.
Thank-you for all your comments and viewing the video. I have other videos I would like you to view.
John the Mouse Map:
https://drive.google.com/open?id=18IyJwLu-3PoR48vxQ78zhUXd7jU&usp=sharing
Cripto Donation:
cloakcoin:CBs9HooP6g2u1y4pFJdWdaiaeBV1b7x8Xe
Other Links:
http://faucet.cloakcoin.com/?id=25647
https://www.youtube.com/Johnthemousevideo
https://twitter.com/JohntheMouse
Music:
Tags:
water, pump, Flat belts, outside, pumping, gas engine, vintage,
Youtube Video Transcript:
