https://github.com/holgern/beem
beem is a python library and command line tool for HIVE. The current version is 0.24.9.
There is also a discord channel for beem: https://discord.gg/4HM592V
The newest beem version can be installed by:
pip install -U beem
Check that you are using hive nodes. The following command
beempy updatenodes --hive
updates the nodelist and uses only hive nodes. After setting hive as default_chain, beempy updatenodes can be used.
The list of nodes can be checked with
beempy config
and
beempy currentnode
shows the currently connected node.
@crokkonbeem is now able to connect to nodes with unknown chain ids.
This allows it to build a testnet with a new chain-id and use beem for testing.
E.g when running a witness server in a test net, beem can now be connected to the local node:
beempy set nodes ws://127.0.0.1:8091
It is also possible to connect to the testnet from 
beempy set nodes http://134.209.41.170:8091
It is possible to view the chain config with
beempy chainconfig
The following commands can be used to go back to the hive blockchain (use_condenser is also set to true as explained in the next section):
beempy updatenodes --hive
beempy set use_condenser true
The testnet from inertia does not have the condenser API activated. Therefore, I added a new config parameter which can be used to disable condenser API calls.
The condenser API is disabled by
beempy set use_condenser false
The condenser API is enabled by
beempy set use_condenser true
This allows it to broadcast on the testnet.
beem uses normally the condenser API for broadcasting, as the non-condenser version needs all amounts in json format and not as string.
It is now possible to use the json format for broadcasting when setting json_str=True. This is automatically done, when setting use_condenser=True.
As the testnet has a different prefix (TST), keys have to be added again with addkey:
beempy set nodes http://134.209.41.170:8091
beempy set use_condenser false
beempy addkey
Now we can broadcast a transfer (HIVE -> TESTS and HBD -> TBD):
beempy transfer -a holger80 beembot 0.001 TESTS test
The balance can be checked with
beempy balance beembot
Here is also two small python snippets for broadcasting a transfer on the HF24 testnet:
from beem import Hive
from beem.transactionbuilder import TransactionBuilder
from beembase import operations
tstnet = Hive("http://134.209.41.170:8091")
tstnet.wallet.unlock("my_wallet_pass")
tx = TransactionBuilder(use_condenser=False, blockchain_instance=tstnet)
op = operations.Transfer(**{"from": 'holger80',
"to": 'beembot',
"amount": '0.001 TESTS',
"memo": 'test 1',
"json_str": True,
"prefix": "TST"})
tx.appendOps(op)
tx.appendSigner('holger80', 'active')
tx.sign()
tx.broadcast()
from beem import Hive
from beem.account import Account
tstnet = Hive("http://134.209.41.170:8091")
tstnet.wallet.unlock("my_wallet_pass")
condenser_config = tstnet.config["use_condenser"]
tstnet.config["use_condenser"] = False
acc = Account("holger80", blockchain_instance=tstnet)
acc.transfer("beembot", 0.001, "TESTS", "test 2")
# Set to old state
tstnet.config["use_condenser"] = condenser_config
Here, use_condenser is set to False before broadcasting. As this is stored, the old state is restored at the end of the script.
I'm not so happy with my solution for use_condenser. I will think of a better solution in the nest release.
Beem does not handle amounts with more than 3 digits for HIVE and HBD and with more than 6 digits for VESTS.
Before 0.24.9, a float amount was rounded to 3 or 6 digits when calculating the bytes representation of an amount (which is needed for the signature). This bug makes it impossible to transfer 0.9999 HIVE (as it was rounded to 1.000 internally).
We can now try to transfer 0.0199 TESTS on the testnet (I changed the node to the testnet, set use_condenser=False and added my active key as described above):
beempy transfer -a holger80 beembot 0.0199 TESTS test
The 0.0199 are now correctly handled and 0.019 TESTS have been transferred.
If you like what I do, consider casting a vote for me as witness on Hivesigner or on PeakD