Window type air conditioner rebuilding

Window type air conditioner rebuilding

I am hot in the heat, but the humidity is too high in the morning ...

I started to trace my home earlier this year and bought several appliances. The last thing left was an air conditioner.

Thanks to the option, there is a wall-mounted air-conditioner in the bedroom, but I did not have one in the other room I used as a studio.

I do my MIDI work with Logic Pro X, so I do not have a lot of heat coming in.

I use servers, desktops, lights and so on in my room, so the temperature usually goes back and forth between 30 and 32 degrees.

In mid-March, I heard the story of sharing a window-type air conditioner in carrot market during the middle of second hand market ambush.

I still do not feel the necessity to install it, and while I am neglecting it,

I removed the frame for cleaning.

I was so ridiculous that I cleaned up a bit in those days.

May be harmful. caution!

I can not express well in the picture?

I was really nauseous. Suddenly sage time came.

Do you live with this or dispose of it?

Nowadays, you seem to be using a lot of Paceco window-type air conditioners.

1. First, I took a picture of the power source. When many people separated the jump line, I did not separate them for a long time.

1. The primary is to remove the propeller and remove some of the rust ...

You look at the guide and the propeller.

1. Firstly, PB-1 was used to remove dirt and grease, and then rust removal was carried out using rust remover FC-1.

When the rust remover is sprayed, the color changes to purple, and a bad smell of perm is generated. Work in a well-ventilated place

The rust remover was sprayed about five times, and the rusted area was rubbed with iron brush, but the top part is still full of rust.

So, if the water is going to drain over there, and you have shared it with me, I hope you did not mistake the installation.

If you do not drain well, the rust will rise.

We continued cleaning while spraying hot water.

The window-type air conditioner is very simple in structure, so I just sprayed it with water, and then I applied grease to the rotating part.

1. After letting it dry naturally for about three or four days, we sprayed anti-rust spray for floor rusting work. This was also about 5 layers of dry, repetitive and repetitive.

1. After that I sprayed a waterproof spray.

Because the waterproof spray is highly permeable, it hears the place where the rusting work was carried out, and it finishes by applying only a part.

It was too annoying that I did not open the radiator.

It is the last picture before covering the lid. I think I've cleaned my own cleaner.

I installed it on the window and finished the sound absorbing material that I worked on the ark. I think I will be able to show you how to install the next one.

The temperature of the room is going down steadily for about 15 minutes.

The window type air conditioner has to wait until the water comes out somewhat in the early stage before the temperature drops sharply.

The image below is an image of the restoration of the window type air conditioner.

Then I will use Iso Pink to finish the repair work and return to the next page.

Thank you for reading the long article.