Houses - 12
Things that I personally took care of ...
I've always seen the house every time I move around, and the houses that I've done well in the interiors have not always liked it.
It is interphone, switch, boiler terminal and so on. Even if I use something plausible, the terminals attached by Junggu heating
It was so annoying. I started to build a house and I decided to fit it exactly and choose a pretty one.
If you look at the pictures that come up on the internet that are beautiful and newly created, the switches do not match each other,
There are quite a lot of designs that I do not like. The room of the house is important, but the parts that are visible are practically
I thought that it was a great satisfaction when I used my house and I was able to give the best impression when I showed it to others.
So the products I chose were all considering the size, color and position of the terminal from the design stage in advance.
Switches and outlets used products from Germany's Jung.
A little bit of classy, modern switches / sockets ... There are German zillers, jungs and buckers. I have a relatively common Panasonic.
Panasonic is not cheap too, so I use Panasonic to use it.
I asked the electrician for construction.
The switch, the outlet type is European, the Chinese type is the square, and the Korea and the United States are the long rectangular form. so
I had to work differently than usual, so I needed enough consultation and preconditioning with the woodworker / electrician.
Gray is switch 3, white is normal switch. The reason I changed the switch color to 3 is because it's confusing to switch on and off
The switch is designed to climb up and down on the second floor when climbing up stairs or upstairs.
Gray is more expensive. Metal is much more expensive. Special color is a switch. It costs more than 50,000 won .. At a wicked price ..
I did not see any of the outlets, but I applied them to other common outlets.
I have a lot of e-mails with my jung distributor and I have a lot of contacts.
I was proud to see you later.
That position is not just a rough decision.
Over a 20-page page, I made a direct link to where the lights were connected and where each outlet and switch would apply
All of those who print with this sketch drawing and work on the construction work.
In this way, I tried to choose a design that matches exactly one knife.
As a matter of fact, nowadays, it is a huge problem in the dragon. Samsung SDS product and Rinnai boiler terminal ..
At the time, I think there was no choice in function and design.
