BMW R9T tuning part
The bikes (no name yet) are shipped last Saturday and the total mileage is only 23 km.
I traveled from the center to my home. .
I do not know anything about bikes, but I know I'm just going to go. .
Custom work, ie tuning, does not matter much ^ ^
It is the courier arrived from America in that sense.
I had an Independence Day in early July. I went to a site called RSD, which I was thinking about, and it was a discount event.
I was able to purchase at a much cheaper price than domestic sales.
I was lucky ^^
Dad's Day in May is also a good day to get a discount, and Thanksgiving or Boxing Day at the end of the year is a good day.
I got it via UPS, but I got it in just 3 days after receiving the tracking number from RSD.
In fact, the Korea-US FTA does not separate the tariffs, so the tax amount is only 189,880 won.
At first glance, this guy wants to be the first cylinder head cover I want to have, so I will try opening it first.
Roland Sands Design also supplies aluminum cutting parts as BMW genuine parts,
This floor is quite a famous bike custom part manufacturer.
Especially Harley Davidson is more famous for those who operate it ^ ^
Behind the box is a description of the direction RSD is pursuing, along with the sign of the representative.
It is printed, but it is good because it is the atmosphere where something brand Heritage is felt.
Now I try to open the box with trembling heart.
I guess I should have freaked out to see if the part is sensitive to scratches. .
Packing is like a pack of pills. Hehe
If you buy a digestive system from our pharmacy, you'll find that each pill is packed separately.
I've seen this style for a while and it looks like a pretty safe way to do it.
When you peel the pavement out of the pills, you will see the cylinder head cover of the Alin-Inty, which is brilliant and bling-blinged.
The models supplied with BMW genuine are the opposite of this, while thin silver lines are drawn on the entire black background.
I think my car is a silver tank and I think it would be better.
BMW genuine parts found by Google.
This is also supplied by RSD. As mentioned above, the orca tank seemed to fit much better than the silver tank.
Sometimes it is said that a bad product will come on the way. Fortunately, I received a product that is state-of-the-art.
Was it valid to order and then send it to RSD marketers for good?
I guess I just had a good luck.
The following is the front cover seen from the front of the bike, the official name is Breast Plate.
If it is expressed in the form of a man, it can be called a cover.
It is the component which is taken out from the box and lined up.
There is a bolt with this product, Loctite, and mounting manual.
The manual is well-represented so anyone can see it, but I recommend that you leave your shit hands like that.
I think it would have been hard for me to be alone on a hot day.
As you can see from the CNC part where the RSD is engraved,
This is also the sensitivity of these parts.
Now let's take a look at the other parts shipping together.
This is the part that blocks the hole drilled at both ends of the shaft driver.
I have to run now but I have to go to the garage and leave it for myself.
And the requirement is a cover that covers the bottom half of the frame.
Easy to install and easy to work with Loctite for each part.
However, torque ranch is essential.
And the requirement is the Rear Drive Pivot Plug,
Later, when I get used to the bikes and get on well, I'm going to get rid of my protector and stop him. haha
And the requirements are bar end.
It is also a part that can easily be mounted. haha
I put a full set box once and take a commemorative photograph.
One thing I regret is that there is no headlight cover, and the unity of the style of the silver braid in Style 2 seems to be falling a little.
And there are many out of stock sites in foreign countries .. ;;;
And my favorite Oles!
I do not have my Orleans in my car, but I ordered it at the factory when I wanted to put it on my bike.
It is written as Alna Inti, BM440.
When you open the box, the top cover that looks like this is protecting the suspension.
Suspension boxes have been repaired several times, and they have always been a protective cover.
I'm lying on the Orleans suspension, which looks great and heavy.
Even if I look at it, I can feel the force that I would stick to something.
Includes owner's manual, German TUV certificate and initial setting guide.
Maybe I should just set it out in Motorad Seoul, so I do not think I need to set it.
I guess I need to do some pre-load setup based on weight and some compression and rebound settings depending on my driving habits.
Especially, depending on your weight, even if you have the same spring, you may feel that the rider is incompatible with the spec, so I think the initial setting of the expert is essential.
Anyway, I would like to make a request to set up in Orleans Korea,
I am planning to install a steering damper anyway, so I think I would do it at once.
There is nitrogen in the reservoir tank, and it is said that the pressure should be constant above a certain level so that it does not fail and works properly. I am curious, how to check and replenish.
And, the compression value gets harder toward +, and goes down to -.
When you first set it, you can lock it, then turn it in the opposite direction and set the value.
And the requirement is the preload adjuster, which turns it up and down through the threads to determine the spring length.
Will the garage be a little affected?
Looking at the numbers on the springs,
This guy's spring tension is 160 Nm.
Finally, take a picture just before putting it in the box.
Ha ... I love Orleans too.
So pretty.
KW has a different feeling of luxury.
Now I will bring the parts to Motorad Seoul where I left off.
Now my bike is going to be installed at one time because it is going to be tubeless work since the day when the bike comes out.
I asked you for a picture of the work process as I entrusted the part, and you took it so beautifully.
Thank you! ^^
Now I put it in the workshop for work.
The rear wheels were already removed for tubeless operation,
It seems that Motorad Seoul is good at the tubeless work.
The warranty period is also 2 years, and it will be safe if the AS period is long due to the nature of tubeless operation.
I do not want to tune the Kinneo or any other tubeless wheels during that period, but I do not know.
Unlike cars, mounting a motorcycle suspension looks pretty easy.
It is such a feeling that if I just throw it and throw it, it will be good.
Yeong Rong itself?
It looks like it will feel like it will be nice to see anything beautiful too. ^^
Now the following is the cylinder head cover.
Also called valve cover, the manual says cylinder head cover.
I have checked the parts names that are not very different but are used in combination.
BMW RSD is expressed in this way ^ ^
I do not know what the bike engine is.
However, the important thing is that when the cylinder head cover is reinstalled, the gasket should be unconditionally replaced.
According to the manual, it is said to change when there is damage.
I personally prefer changing these things and changing them into new ones.
Finally, when tightening the cover, the tightening torque of the bolt is 10 Nm.
It's a RSD cylinder head cover complete with voila.
I think it's better for my car because there are a lot of silver areas compared to genuine aluminum covers.
It's like this when you put on the engine guard of Lich,
There is no interference with the guard.
Cylinder head cover is too pretty to look at cooking.
I'm going to use the ornamental bikes.
Oh bling bling I have to put a glass coating on my house. haha
I do not know what you mean, but I just want to feel like I'm in control of something.
I do not know how to do this, but I do not know how to do it.
If it had been in the stuff I received, I probably would not have. ㅠ
I am really glad to have received good-quality products because everyone is happy.
Now it's Breast Cover.
Aka cover!
The motor cover is referred to as the engine cover.
In some shops, it is called belt cover, probably because the belt is visible when opening the cover.
Tightening torque is 5Nm and Loctite should be applied.
And I use the flexible joint ratchet which I mentioned before to loosen the bolt on the upper part, but I recommend that you do the masking work on the ratchet joint part so that the product and the motorcycle frame are not scratched.
Completion of voicemail!
I'm sure this force will flow!
It's just like blocking everything
