--THIS IS NOT A FULL TUTORIAL. YOU SHOULD BE FAMILIAR WITH OPERATING MASTERNODES. A FULL DETAILED VIDEO TUTORIAL WILL COME AT A LATER DATE IF DEMAND REQUIRES--
====================
INSTALL SWAP FILE
====================
sudo dd if=/dev/zero of=/swapfile bs=1M count=2000
sudo mkswap /swapfile
sudo chown root:root /swapfile
sudo chmod 0600 /swapfile
sudo swapon /swapfile
sudo chmod 0600 /swapfile
sudo chown root:root /swapfile
sudo echo "/swapfile none swap sw 0 0" >> /etc/fstab
====================
INSTALL DEPENDENCIES ON VPS
====================
sudo apt update -y
sudo apt upgrade -y
sudo apt-get install git -y
sudo apt-get install build-essential -y
sudo apt-get install libtool -y
sudo apt-get install autotools-dev -y
sudo apt-get install automake -y
sudo apt-get install autoconf -y
sudo apt-get install pkg-config -y
sudo apt-get install libssl-dev -y
sudo apt-get install libevent-dev -y
sudo apt-get install bsdmainutils -y
sudo apt-get install libboost-system-dev -y
sudo apt-get install libboost-filesystem-dev -y
sudo apt-get install libboost-chrono-dev -y
sudo apt-get install libboost-program-options-dev -y
sudo apt-get install libboost-test-dev -y
sudo apt-get install libboost-thread-dev -y
sudo apt-get install libminiupnpc-dev -y
sudo apt-get install libzmq3-dev -y
sudo apt-get install software-properties-common -y
sudo add-apt-repository ppa:bitcoin/bitcoin -y
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev -y
====================
INSTALL CHAINCOIN CLIENT ON VPS
====================
cd
git clone https://github.com/ChainCoin/ChainCoin.git -b 0.16
cd ChainCoin
./autogen.sh
./configure
make install
====================
CONFIGURE CHAINCOIN.CONF ON VPS
====================
cd
mkdir .chaincoincore
cd .chaincoincore
nano chaincoin.conf
(edit this info on config file then save and exit)
daemon=1
listen=1
server=1
rpcuser=chcuser
rpcpassword=chcpassword
rpcport=11995
rpcallowip=127.0.0.1
masternode=1
masternodeprivkey=GENKEY
====================
INSTALL SENTINEL ON VPS
====================
cd
sudo apt-get update
sudo apt-get -y install python-virtualenv
sudo apt install virtualenv -y
cd ~
git clone https://github.com/chaincoin/sentinel.git && cd sentinel
virtualenv ./venv
virtualenv ./venv && ./venv/bin/pip install -r requirements.txt
===================
EDIT SENTINEL.CONF AND CRONTAB
===================
cd sentinel
nano sentinel.conf
(edit and save/exit the following)
chaincoin_conf=/root/.chaincoincore/chaincoin.conf
crontab -e
(edit and save/exit the following)
NOTE: Those dots are asterisks but steemit...
====================
STARTING CHAINCOIN CLIENT
====================
chaincoind
====================
FINISH UP INSTALL
====================
-- If you think your wallet is taking a long time to sync, type in "chaincoin-cli getblockchaininfo", and look for headers. The headers need to reach current number of blocks before the actual blocks start syncing. Patience is key! --
-- If your wallet fails to sync with masternode list, shut it down, delete peers.dat and restart. You can check the progress by typing "chaincoin-cli mnsync status". Sometimes a quick restart is all you need to get data syncing--
You should now be able to complete your new Chaincoin 16.1 masternode install. Like I mentioned, this is not a full tutorial and you should already be familiar with setting up masternodes.
If you need additional help, you can refer back to my previous detailed masternode tutorial
https://steemit.com/masternode/@fredyendesigns/chaincoin-remote-controller-masternode-setup-guide
====================
DONATIONS WELCOMED
====================
CHC: CPMVMqMoyzZQTu1YMS4aYocET9GU1oKZeJ
