HOW TO MAKE A KITE
first of all, prepared the materials , that consist of :
- Construction paper
- Thread
- Stick–stick or pipe cleaners or skewers
– Scissors
– Ruler
– Color Marker or pencil
***
B. STEPS TO MAKE A KITE
Prepare one sheet of paper to make the body of the kite. If forced to does not exist, you can combine the four sheets of paper with masking tape.
Use masking tape to combine two pieces of paper that make up the top, then snap also two sheets of paper that formed the bottom. Connect the two parts of it with and be sure attached tightly.
Cut the four corners of the paper so that it becomes the shape of the kite. Take a look at the above picture to get an idea of its proportions.
The shape of the kite takes a little longer at the bottom about 7.62 cm from the cusp. The cusp is where two corners kriri and kite was right.
Tie two pieces of sticks or pipe cleaners into one tightly. Skewers of wood you can use as a stick. All types of yarn can be used to tie a taut second stick.
As long as the bonds are not loose and do not use the rope (the rope is too thick). To ensure both a stick tied to a place that was fitting, align first with paper that has been cut into the shape of a kite. Cut excess yarn on their bonds.
Make 4 holes in paper-shaped kite at any angle. Insert the thread through each hole and all around each stick.
If you want, leave a little extra at the top to insert the tape later. Tie rod in position on a kite-shaped paper.
Tie the thread to the left and right sides of the sticks horizontally. Then tie the thread to the middle of the yarn into the thread to fly kites. This thread was made all that you need to fly a kite.
Bond paper or tape on the corners of the kite to form the tail. You can add a bit of material on the ends of the kite so that adds to the burden and the ability to levitate. The tail also complements the appearance of your unique kite.
***
***
***
***
***
Good luck.