Making a ball with soil, And that ball will float on the water.

Hello everyone, I hope everyone is well. I have come among you today with a beautiful ball made of clay. That ball will float on the water after making. I would like to present a short tutorial to you. Then you see the process of making my ball.

First you have to take some soil that has glue in the soil. If there is no glue then the ball may break after making. For this you need to take soil with glue. The soils must be soaked in water. If you don't give light water, you can't make balls or anything else.

The same amount of soil should be taken in two places. The size of the soil should be the same and what to do with the soil you see in the next picture.

One of the earthenware pots divided into two parts should be taken in hand.

Make it look like a beautiful plate. Which will look like a plate.

Then set it aside and take the next piece of clay in your hand. You need to make the plate a little smaller than that size. But keep in mind that the second plate is a little smaller than the first plate.

When your two plates are to be made then you need to follow the picture below.

Place the two plates you have made facing each other and remember to place the smaller one on top and the larger one on the bottom.

Then the face of the 2 plates should be well leveled. Make it hollow inside and have no holes. If there is a hole then the ball will sink in the water if water enters inside.

After applying the makeup to the soil well, you need to make sure that there are no holes. But of course if you don't have a hollow inside, it can sink in the water and if you dry it in the sun, it will float on the water for a long time.

Finally your floating ball was created. Now it is ready to float on the water. You go to the side of the pond or river and float on the water.

In the picture you can see the ball floating on the water. It won't stay afloat for long. If it had been dried in the sun, it would have floated on the water for a long time.