Many house fires start in the dryers, and are easily preventable!
I was a firefighter for a number of years, and was always interested on how house fires started. Many fires start in the dryer vent pipe. This is because it fills up with lint, and the lint becomes exceedingly dry and will catch on fire. These fires can be prevented with an annual inspection of your dryer exhaust pipe. In this post, I will take you through the steps of cleaning or replacing the pipe.
Tools you will need
A flat head screwdriver, a tape measure, two 4inch hose clamps (if cleaning, you may be able to reuse the old ones), a pair of snips, and new hose if replacing it.
So first thing is to remove the old hose. You may need snips to cut off a plastic clamp, or a screw driver to remove a hose clamp.
This is where the fires start!
This one was not bad, but defiantly required the yearly cleaning. So, to install a new pipe, you can either use a measuring tape, or align the old and new pipes to get the correct length.
You will need to cut the wire at the correct length with wire snips.
Installing the new pipe is just as easy as the removal of the old one was.
And if you have a newer dryer, there may be a sensor to tell you when it needs cleaning, please do not ignore this!
Thanks for reading! check out my other cool posts 