Colored paper fruits with the 3D technique (ENG/ESP)

frutas d papel.png

Greetings dear friends hive crafters, I hope you are very well and enjoy the weekend, today fills me with satisfaction and joy to return to share my crafts with this great community DIYHub this time I come to show you how to make a colorful paper fruits with 3D technique, with a very simple basket also made with dark colored paper, to highlight the fruits to decorate.

Next I will show you the materials and the steps to make these beautiful paper fruits.

The pictures you will see below were taken with my phone model TECNO SPARK GO 2024.

Saludos queridos amigos artesanos de hive, espero que estén muy bien y disfruten del fin de semana, hoy me llena de satisfacción y alegría volver a compartir mis manualidades con esta gran comunidad DIYHub esta vez vengo a mostrarles como hacer unas coloridas frutas de papel con técnica 3D, con una canasta muy sencilla hecha también con papel de color oscuro, para resaltar las frutas a decorar.

A continuación les mostrare los materiales y los pasos para hacer estas hermosas frutas de papel.

Las fotos que verán a continuación fueron tomadas con mi teléfono modelo TECNO SPARK GO 2024.

separador esposa nuevo 3.png

IMG_20240412_132342_346.jpg

Materials:

Colored paper
2 CDS
1 Silicone stick and gun for silicone
Scissors
Black fine point marker
Pencil
Ruler
White school glue
Plastic lid

Materiales:
Papel de colores
2 CD
1 Barra de silicona y pistola para silicona
Tijera
Marcador negro puna fina
Lápiz
Regla
Pega blanca escolar
Tapa de plástico

separador esposa nuevo 3.png

IMG_20240412_132554_952.jpgIMG_20240412_132826_941.jpgIMG_20240412_133455_216.jpg

To make these fruits we will start by making some circles of colored paper, we will take the colored paper, a CD, a pencil and the scissors.

On the paper we will place the CD, we will draw the circumference of the CD, then we will cut it with the scissors.

Then we will fold it in half 3 times to make a triangle folded in half.

Para hacer estas frutas empezaremos haciendo unos círculos de papel de colores, tomaremos el papel de colores, un CD, un lápiz y la tijera.

Sobre el papel colocaremos el CD, dibujaremos la circunferencia del CD, luego lo cortaremos con la tijera.

Después lo doblaremos por la mitad 3 veces para formar un triángulo doblado por la mitad.

separador esposa nuevo 3.png

IMG_20240412_133616_392.jpgIMG_20240412_133630_060.jpgIMG_20240412_133742_993.jpg

We are going to cut out the triangle in the shape of a heart, taking into account the centered line.

After cutting out, we open this heart, and we will have as a result a flower with 8 petals.

Then we will begin to glue the petals with white glue or silicone, in an orderly fashion, closing as if making a ball, always gluing at the top.

With these steps we will create a tangerine or orange.

Vamos a recortar el triángulo en forma de corazón, teniendo en cuenta la línea centrada.

Una vez recortado, abrimos este corazón, y tendremos como resultado una flor con 8 pétalos.

A continuación comenzaremos a pegar los pétalos con cola blanca o silicona, de forma ordenada, cerrando como si hiciéramos una pelota, pegando siempre por la parte superior.

Con estos pasos crearemos una mandarina o naranja.

separador esposa nuevo 3.png

IMG_20240412_135037_114.jpgIMG_20240412_135145_251.jpgIMG_20240412_135201_321.jpg

We will continue to make a milling cutter, the step is very similar, but here we have 2 differences.

We are going to fold the circumference 3 times the same and cut, but before cutting we are going to make an angle of 2 cm, we can use a smaller plastic lid or some other instrument that will serve as a guide.

We will cut to the circumference and open a new flower, but of a different color, then we will cut 2 petals and extract them.

Seguiremos haciendo una fresa, el paso es muy similar al anterior, pero aquí tenemos 2 diferencias.

Vamos a doblar la circunferencia 3 veces igual y recortamos, pero antes de recortar vamos a hacer un ángulo de 2 cm, podemos usar una tapa de plástico más pequeña o algún otro instrumento que nos sirva de guía.

Recortaremos la circunferencia y abriremos una nueva flor, pero de diferente color, luego cortaremos 2 pétalos y los extraeremos.

separador esposa nuevo 3.png

IMG_20240412_135246_894.jpgIMG_20240412_135409_368.jpgIMG_20240412_142817_351.jpg

We are going to place a little glue forming a flower with 5 petals, and close the top to see the result of the strawberry, if we want a strawberry with more volume, we will glue the petals more open, we will place two on top, 2 below and one on top.

Vamos a colocar un poco de pegamento formando una flor con 5 pétalos, y cerramos la parte superior para ver el resultado de la fresa, si queremos una fresa con más volumen, pegaremos los pétalos más abiertos, colocaremos dos arriba, 2 abajo y uno arriba.

separador esposa nuevo 3.png

IMG_20240412_140247_410.jpgIMG_20240412_141201_090.jpgIMG_20240412_142705_057.jpg

The third fruit is a peach, this one we are going to make with the 8 petals technique that consists only of gluing them at the top with a point of glue.

Possibly, it may be difficult to glue them all, for this we can use a skewer pole that we will introduce inside making pressure to hold the petals while they stick.

At this point we have the fruits ready, we will start making the leaves, we will only fold one end of the leaf, we will draw the shape of the leaf we want and cut it out, then we will fold with semi inclined lines to make the ribs, we will fold first on one side then on the other and we will open the leaf, leaving it with a nice look.

La tercera fruta es un durazno, este lo vamos a hacer con la técnica de los 8 pétalos que consiste únicamente en pegarlos en la parte superior con una punta de pegamento.

Posiblemente nos cueste pegarlos todos, para ello podemos utilizar un palo de brocheta que introduciremos dentro, haciendo presión para sujetar los pétalos mientras se pegan.

Llegando a este punto ya tenemos los frutos listos, empezaremos a hacer las hojas, solo doblaremos un extremo de la hoja, dibujaremos la forma de la hoja que queremos y la recortaremos, luego doblaremos con líneas semi inclinadas para hacer las nervaduras, doblaremos primero por un lado luego por el otro y abriremos la hoja, quedando con un bonito aspecto.

separador esposa nuevo 3.png

IMG_20240412_141044_791.jpgIMG_20240412_143915_490.jpgIMG_20240412_144210_281.jpg

In this step we glue the leaves and stems, now we are going to enjoy some beautiful and colorful fruits, we will start making a basket to place these fruits.

En este paso pegamos las hojas y los tallos, ahora vamos a disfrutar de unas bonitas y coloridas frutas, vamos a empezar a hacer una cesta para colocar estas frutas.

separador esposa nuevo 3.png

IMG_20240412_161346_888.jpgIMG_20240412_162151_654.jpgIMG_20240412_163917_788.jpg

Using the CDs that we have used to make the circumference to make the fruits, we are going to make a simple basket.

The first thing we are going to do is to line the CDs with paper, then we are going to cut some paper ribbons 3 cm wide, we are going to fold 1 cm on each side inwards and we are going to stick them with silicone.

Then we are going to cut these ribbons and glue them around the circumference of the CD we lined, place another CD on top of them and start weaving with a ribbon passing between ribbons, one on the top and one on the inside, making 3 turns of ribbons.

We close the edge of the basket by folding the ribbons, gluing and trimming the excess, then we glue some handles and the basket is ready to place the beautiful fruits.

Utilizando los CDs que hemos utilizado para hacer la circunferencia para hacer las frutas, vamos a hacer una sencilla cesta.
Lo primero que vamos a hacer es forrar los CD con papel, después vamos a cortar unas cintas de papel de 3 cm de ancho, vamos a doblar 1 cm por cada lado hacia dentro y las vamos a pegar con silicona.

Luego vamos a cortar estas cintas y las vamos a pegar alrededor de la circunferencia del CD que forramos, colocamos otro CD encima y empezamos a tejer con una cinta pasando entre cintas, una por arriba y otra por dentro, haciendo 3 vueltas de cintas.

Cerramos el borde de la cesta doblando las cintas, pegando y recortando el sobrante, luego pegamos unas asas y la cesta está lista para colocar las hermosas frutas.

separador esposa nuevo 3.png

IMG_20240412_165014_221.jpg

IMG_20240412_164853_514.jpg

At this point we have concluded with this beautiful fruit ornament, I hope you liked sharing this experience with me, for me it has been a pleasure to share my art of the day with everyone.

I love you all and send you a big hug from a distance.

En este punto hemos concluido con este hermoso adorno frutal, espero que les haya gustado haber compartido esta experiencia conmigo, para mi ha sido un placer compartir mi arte del dia con todos.

Se les quiere, y les envio un enorme abrazo desde la distancia.😘 🤗

separador esposa nuevo 3.png

social networks / redes sociales

Traductor Deepl

Translated Deepl

Ediciones Canva

Editions Canva

Lauracraft.png

banner.png

H2
H3
H4
3 columns
2 columns
1 column
Join the conversation now