The Cost and The Payouts
I have been mining Ethererum Classic for about 8 months now. At today's prices my payout is almost $3000.00 with 94.295 $ETC mined. So after hardware cost and power consumption I am up about $1800.00 profit over those 8 months.
Boiling down the profits and how I got there.
| Mined So Far | My Hash Rate |
|---|---|
 |  |
| When I first started back in March of 2017 I was getting about 1 $ETC every 10 hours @ 67.7 mh. The difficulty level has increased to where I am getting 1 $ETC now every 67 to 70 hours. This will gradually increase. | This side shows my current hash rate and has some stats on it like the current BTC exchange rate and the average USD exchange rate for $ETC. It also shows that total profit you may expect over a period of time. |
Software shown above is from Google Play Store
The Hardware and Software I Am Using
I am using 3 AMD Sapphire GPU's. Two are R9 290 cards and 1 R9 280X. I bought these on ebay for about $150 each. The MB is an ASRock Z87 Killer Motherboard with 3 PCI16 slots and 4 PCIe slots I got for about $230, mine including an i7 CPU and 16GB RAM. In order to have the GPU's detached from the motherboard you will need some $5.00 USB 3.0 PCI-E Express 1x To 16x Extender Riser Cards . You will also want a good power supply, I have the EVGA 1000 Modular PSU.
If you watch the auctions like a hawk you can still get all this hardware for low prices but they are becoming more difficult to find with crypto mining becoming more popular. I am also using a windows 7 operating system with the Claymore 10 Dual Ethereum Miner software daemon.
The FrankenMiner 👺
| Rig pic 1 | Rig pic 2 |
|---|---|
 |  |
My rig is an out of the box desktop, literally it is a FrankenMiner 👺,but it gets the job done with all 3 cards I am getting in -mode 1 a combined Hashrate of about 58mh. This average down some form the original 67.7 in -mode 2, Dual Mining, I started with back in march.
GPU 0 is the R9 280x the ones hashing at 23x are my R9 290s
The Mining Pool and The Config File
I have been using the etc.ethermine.or mining pool from the beginning. You may notice that my current config below includes a variable -mode 1, this disables dual mining and only lets the software mine Ethereum Classic. If this is set to -mode 0, then it will mine Ethereum Classic and Siacoin. I ran with it in dual mode until the production rate got to about 50 hours per $ETC. At tht production rate I finally turned it off, -mode 1, so only one miner was running. This increased my Ethereum Hashrate by bout 5mh per round.
I have included my current running config file below so you can get an idea of how it is setup for Claymore 10 Dual Ethereum Miner miner.
Claymore Dual Ethereum Miner Comnfig .bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:\claymore10\EthDcrMiner64.exe -mode 1 -esm 1 -epool us1-etc.ethermine.org:4444 -erate 0 -ewal 0x8E84B20E00ea647A550DfA8C75F1e9F8cA805B39.qht3 -epsw x -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal libertyranger.qht3 -dpsw x -dcoin sc
Happy Mining
Just my two STEEMS Worth.
Vote LibertyRanger as your Witness or Set Proxy.
Go to https://steemit.com/~witnesses URL address then scroll down to Vote.
Or you may simply follow this link and click the Continue button to confirm your vote.
https://v2.steemconnect.com/sign/account-witness-vote?witness=libertyranger&approve=1
Please follow me @LibertyRanger, Vote Up and Resteem
Thank you,
@LibertyRanger