Origami de carta Bebe Unicornio (Splinterlands)| Origami Baby Unicorn Card (Splinterlands)

Hola queridos amigos de Hive, es un gusto unirme al concurso de orogami, para ello he elegido la carta de Baby Unicornio de Splinterlands. Espero que les guste el paso a paso de esta pieza.

Materiales utilizados

  • Hoja de cartulina azul
  • Pintura blanca
  • Pega
  • Escarcha morada

Paso a Paso

1

Tomamos la hoja de cartulina azul que debe medir 20 X 20 centimetros, y debemos hacer una "X" en le medio de la hoja, Luego debemos tomar las esquinas y llevar esta al medio de la hoja para formar triangulos. Se forman 4 triangulos como pueden apreciar.

2

Luego abrimos la hoja de cartulina y procedemos a dividir todo el area en segementos rectos de forma horizontal.

3

Luego se debe dividir la hoja en segmentos iguales rectangulares de forma vertical. Luego se hace un dobles a la mitad de la hoja en forma horizontal.

4

luego se toma dos de los segmentos horizontales y los dos primeros verticales y se unen, luego en la punta se forma una punta.

Esta punta que se forma se dobla y se forma un rombo. Luego se toman las puntas inferiores y se doblan hacia el medio formando un triangulo.

5

el triangulo superior se dobla hacia dentro o hacia nosotros.

De esta manera quedaria la figura, una vez que se forma se debe dobalr la hoja a la mitad.

Seguidamente se debe volver a doblar ambos lados de la hoja formando un zig-zag con el material.

6

Seguidamente se abre la figura y los cuadritos que pueden observar se doblan y se forma un triangulo, esa forma permitira doblar la figura y quedaria una cola triangular.

7

Para formar el cuerno se debe tomar la punta laiente y se dobla hacia atras. Luego para formar las patas se deben doblar estas para formar dos rombos.

seguidamente se deben doblar las bases tiangulares de ambas patas, solo un pcoo para que asemeje a lso cascos de los unicornios.

Este es el resultado final.

Seguidamente he pintado al unicornio de blanco para buscar la apariencia de Baby Unicorn y el cuerno del medio apliqúe unpoco de pega blanca y luego agregué la escarcha.

Saludos amigos! muchas gracias.

Invito a participar a @divergente1, vidaysalud1 y afrofat1 para que se unana a la iniciativa!

Muchas gracias amigos.

Creditos

  • Las imagenes me pertenecen
  • Tradcutor: Deepl Traslator
  • Banner: canva


Hello dear friends of Hive, it is a pleasure to join the orogami contest, for this I have chosen the Baby Unicorn card from Splinterlands. I hope you like the step by step of this piece.

Materials used

  • Blue cardboard sheet
  • White paint
  • Glue
  • Purple frosting

Step by Step

1

We take the sheet of blue cardboard that should measure 20 X 20 centimeters, and we must make an "X" in the middle of the sheet, then we must take the corners and bring this to the middle of the sheet to form triangles. We form 4 triangles as you can see.

2

Then we open the sheet of cardboard and proceed to divide the entire area into straight segments horizontally.

3

Then divide the sheet into equal rectangular segments vertically. Then we make a double in the middle of the sheet horizontally.

4

then take two of the horizontal segments and the first two vertical segments and join them together, then form a point at the tip.

This tip that is formed is folded and a rhombus is formed. Then take the lower points and bend them towards the middle to form a triangle.

5

the upper triangle is folded inwards or towards us.

Once the figure is formed, fold the sheet in half.

Then you must fold again both sides of the sheet forming a zig-zag with the material.

6

Then open the figure and the squares that you can see are folded and a triangle is formed, this shape will allow you to fold the figure and a triangular tail will be left.

7

To form the horn, take the tip and fold it backwards. Then to form the legs, bend them to form two rhombuses.

then bend the triangular bases of both legs, just a little bit to resemble the hooves of the unicorns.

This is the final result.

Next I painted the unicorn white to look like a Baby Unicorn and the horn in the middle I applied a little white glue and then added the frosting.

Greetings friends! thank you very much.

I invite @divergente1, vidaysalud1 and afrofat1 to join the initiative!

Thank you very much friends!


Credits
.

  • Images belong to me
  • Translator: Deepl Traslator
  • Banner: canva
H2
H3
H4
3 columns
2 columns
1 column
Join the conversation now