Good and bright 🌞 morning to all the members of Diyhub community, i hope we all are doing great 😃 this wonderful morning because as for me my morning is starting with a little creativity and clear hand work skills.
Today i decided on crafting out a Mini-Bus with Hive as the logo, it was not actually so easy to Craft it but with the help of God i was able to accomplish my mission today, so below 👇 are some tools and waste material i used in constructing it today.
TOOLS AND MATERIALS
1). Carton
2). Scissors ✂️
3). Super glue
4). Pencil ✏️
5). Tiger 🐯 battery 🔋
6). Yellow plaster
7). Water colour
8). Tiny electric ⚡ wire's
9). Tiny Bulbs 💡
10)Sticks of broom 🧹
11). Eraser
12). Plastic Mineral covers
CLEAR STAGES OF PRODUCTION
1). STAGE ONE: The first stage is to cut out some part of the carton with a scissors ✂️ and then use the pencil ✏️ to draw the sides of the mini-bus with it's doors.
2). STAGE TWO: Next is to use the scissors ✂️ to cut out the places that has been drawn with the pencil ✏️.
3). STAGE THREE: The third stage is to cut a straight and long carton, and in the carton draw the front and back mirror 🪞 of the mini-bus with a pencil ✏️ and after that use a scissors ✂️ to cut out the pencil ✏️ areas, then now use the super glue to gum the the two sides of the mini-bus with the front and back mirror 🪞 carton.
4). STAGE FOUR: Next is to use a carton and a scissors ✂️ to cut out the front design of the mini-bus and then use a super glue to gum it immediately to the uncompleted mini-bus.
5). STAGE FIVE: The fifth stage is to cut out a small carton for covering the back of the uncompleted mini-bus and then use the super glue to gum it in the mini-bus.
6). STAGE SIX: Depending on how you want to do the eyes 👀 of the mini-bus, for me i decided to use the plastic wrap 🌯 of the super glue to do the eyes of the mini-bus and then cut a smaller piece of carton as a design close to the eyes 👀 of the mini-bus and then use the super glue to gum both in the uncompleted mini-bus.
7). STAGE SEVEN: The next thing to do is to fix the Tiny electric ⚡ wire's and Tiny bulbs 💡 💡 and then use the super glue to gum it inside the eyes of the mini-bus.
8). STAGE EIGHT: It is now time to arrange the tyre's aspect of the mini-bus, and you need a carton, 4 plastic Mineral covers, and Two sticks of broom 🧹 and then fix them all in the uncompleted mini-bus.
9). STAGE NINE: Then next stage is to use a small carton to wrap 🌯 the 3 tiger 🐯 batteries 🔋 together and then make use of the plaster to hold the battery 🔋 wrap and after that connect the Tiny electric ⚡ wire's in which the Tiny Bulbs 💡 are connected with to the battery 🔋 to attract electricity.
10). STAGE TEN: Stage ten is to use the water colour to give the mini-bus my desired colours, as you can see i used green 💚 and black 🖤 as the colour of the day.
11). STAGE ELEVEN: It is now the right 👍 time to create the special Hive Logo using a red pen and a red ♥️ colour.
12). STAGE TWELVE: The last stage is to use the super glue to gum the Hive Logo on the top of the mini-bus and after that the mini-bus with Hive as the Logo is now ready for work.
As you all can check the stage's, you will all agree 💯 with me that it really took me a lot of time to accomplish this task infact it was all by the special grace of God.
I'm now using this great opportunity to appreciate all the members of Diyhub community for their engagements and wonderful 😊 Post infact my special appreciation goes to @Diyhub for always stopping by at everyone post in the community and also making meaningful comments that can help up build a person to do more in Diyhub community.
Thank you all for stopping by my blog today, I really appreciate it a lot.
All photos were taken with my Tecno spark 40 phone 📱.
