So about 2 months ago I shared a post on Saturday about my printing adventures in it I mentioned I had issues with one of my older printers, it's been collecting dust but I got it working again! link to the post from 2 months ago here
and an exert from that post about the printer in question right below.
The blue one under the table has been giving me some poor quality and was also printing a little offset from the center reducing the total build area so I was trying to update the firmware with the manufacturers software it' supposed to be easy one click and you done, well one click and the printer is done, the firmware update ended up breaking the printer, as of now I power it on and the control screen for it is black, I tried to install some other firmware but no success yet, I will have to try again, I should be able to get it back up and running but the quality issues are likely still going to be present and I will have to address them too but at this point I just want to make it work so it's not just a heavy paper weight.
A picture from that post
Well I got it working but the quality was still trash, you can see the results below.
So to figure out what the deal is I did 2 calibration prints to figure out the best temperature and retraction settings
It looked better after the adjustments but one side of it was coming out pretty bad.
Right below is how it should look like these 2 got made by my other printers.
Since the side facing away from the part fan looked bad I thought maybe the fan was not great right below is the fan I had on it
So I found some models online and printed out a few until I found a good design that seem to work I went with the one on the right in the picture below, this fan hits it form both sides unlike the one that was on it that is only getting the front
So after that I tried to print some stuff and it came out fairly well.
made this big bowl
Then I also printed something for the Art&3d series and it came out fairly well too not perfect but pretty decent, I blurred it out, you see it on some Monday not the next as I got something else planed lol
Reblog lottery
We got 45 participants for our reblog lottery this time around.
@blitzzzz @bntcamelo @caspermoeller89 @chaosmagic23 @daniasi @dgi @duckmotor @dynamicgreen @ekads @eolianpariah2 @ferod23 @florakese @fonestreet @henruc @henrydecide @hjrrodriguez @jenam @jhonnygo @jorgebgt @khantaimur @kungfukid @ladymisa @lolodens @miriammarga @mirroredspork @monsterbuster @mxm0unite @necho41 @olaf.gui @pepetoken @rebe.torres12 @revolverocelotyt @rosauradels @seki1 @servelle @sieghard1990 @stekene @stickupcurator @sylmarill @tengolotodo.leo @trautenberk @vaynard86 @vrezyy @ydm6669 and @yova
and the winner this time around is....
So close but no cigar, better luck next time!
@caspermoeller89! Congratulations enjoy your 10% profit share on this post, 0.33 DUO tokens, 5 HBI units more about HBI units here
The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share, 0.33 DUO token and 5 HBI units (bonus wheel) on my next post
This is all done automatically and I apply the winner to be a beneficiary for the post.
Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.
I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.
@bitcoinman's bits of wisdom
- Invest only what you can afford to lose and be mindful of the potential risks.
- Unless you can accept delivery stay away from futures and stick to physical.
- Leverage is a great tool for losing money fast.
- Numismatics for the lows stick to smart stacking baby.
- Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES
Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO
You can find out more about the #silvergoldstackers community in this post here
Weekly Post Schedule
| Day | Post |
|---|---|
| Monday | Art&3D |
| Tuesday | |
| Wednesday | |
| Thursday | |
| Friday | Stacker of the week |
| Saturday | Lazy Saturday post |
| Sunday |
Profit share
10% of this post earnings go to @caspermoeller89 for being our reblog lottery winner.
That's it for today's post thanks for stopping by your support is truly appreciated.