Saludos comunidad Holozing, les mando un fuerte abrazo espero se encuentren bien y que esta semana sea muy productiva para ustedes, nos encontramos a mitad de semana y el trabajo ha sido fuerte al menos hoy me encuentro descansando. Cómo siempre encantada de compartir las manualidades en esta comunidad que bien han sido apreciadas.
El día de hoy les voy a compartir esta idea de porta huevos inspirado en la nueva criatura publicada recientemente Woolio me ha llamado mucho la atención su característica física ya que tiene un aspecto soleado y su lana es abundante, realmente es una criatura tierna que tendrá un buen potencial en el juego.
Materiales:
✅Cartón reciclado.
✅Paletas.
✅Foami amarillo y negro.
✅Foami color piel, fucsia.
✅Foami morado, blanco, turquesa.
✅Pintura negra y blanca.
✅Marcadores fucsia.
✅Foami naranja.
✅Tijera.
✅Silicón.
✅Lápiz.Materiales:
Paso a paso
El primer paso es cortar el cartón de huevos reciclado de forma que nos quede nueve compartimientos, seguido de esto vamos a cortar cuatro franjas gruesas de foami negro del tamaño de los laterales, parte frontal de y trasera del cartón, pegamos con silicón.
Luego de esto voy a cortar dos paletas en la mitad y las voy a ubicar en la parte superior e inferior de la parte frontal, pegamos con silicón y procedemos a realizar la figura principal.
Para realizar a Woolio voy a comenzar dibujando un borrador para luego pasar al foami, realicé por partes cada capa para luego solo unirlas con silicón. En foami amarillo realicé sus dos capas en forma de sol también su rostro, sus orejas, su rostro, sus ojos se realizaron con pintura, luego de haber terminado la figura continuamos con la decoración.
Por último realicé dos flores en color blanco y turquesa, ubiqué a Woolio en medio del porta huevos y más flores a los lados, también en las paletas realicé rayas cortas con marcador fucsia.
De esta forma hemos culminado este lindo porta huevos, en dónde la figura principal es Woolio y destaca por su ternura. Muchas gracias por visitar mi publicación, nos vemos en una próxima oportunidad.
ENGLISH
Greetings Holozing community, I send you a big hug, I hope you are well and that this week is very productive for you, we meet in the middle of the week and work has been hard, at least today I am resting. As always, delighted to share the crafts in this community that have been well appreciated.
Today I am going to share with you this idea of an egg holder inspired by the new recently published creature Woolio. Its physical characteristic caught my attention since it has a sunny appearance and its wool is abundant, it really is a tender creature that will have good potential in the game.
Materials:
✅Recycled carton.
✅Pallets.
✅Yellow and black foami.
✅Skin-colored foami, fuchsia.
✅Purple, white, turquoise foami.
✅Black and white paint.
✅Fuchsia markers.
✅Orange foam.
✅Scissors.
✅Silicone.
✅Pencil.
Step by Step
The first step is to cut the recycled egg carton so that we have nine compartments, followed by this we are going to cut four thick stripes of black foam the size of the sides, front and back of the carton, glue with silicone.
After this I am going to cut two pallets in half and place them at the top and bottom of the front part, glue them with silicone and proceed to make the main figure.
To make Woolio I am going to start by drawing a draft and then move on to the foam, I made each layer in parts and then only joined them with silicone. In yellow foam I made its two layers in the shape of a sun, also its face, its ears, its face, its eyes were made with paint, after having finished the figure we continued with the decoration.
Finally I made two flowers in white and turquoise, I placed Woolio in the middle of the egg holder and more flowers on the sides, also on the palettes I made short stripes with fuchsia marker.
In this way we have completed this cute egg holder, where the main figure is Woolio and stands out for his tenderness. Thank you very much for visiting my publication, see you next time.