Limpieza de bujías

Saludos amigos de la comunidad de Hive Motors,por acá Ferbu de nuevo.

Greetings friends of the Hive Motors community, here Ferbu again.

hoy llego un cliente con una camioneta Mazda bt 50 con una falla en el motor.

today a customer came in with a Mazda bt 50 truck with an engine failure.

IMG_20211124_154547_1.jpg

Lo primero que hice fue revisar la bujías, sí las bujías están sucias o tienen mal calibración eso hace que el motor falle.

The first thing I did was to check the spark plugs, if the spark plugs are dirty or have bad calibration that causes the engine to fail.

Así que empecé a sacar las bujías.

So I started to remove the spark plugs.

IMG_20211124_155324_1.jpg

IMG_20211124_154845_1.jpg

IMG_20211124_154837.jpg

IMG_20211124_154705_1.jpg

Al tenerlas todas afuera miren en que estado se encontraban.

Once they were all out, see what condition they were in.

IMG_20211124_155437_1.jpg

IMG_20211124_155429.jpg

Las bujías estaban sucias y mal calibradas y les menciono que el combustible aquí en el país no es muy bueno y daña o ensucia muy rápido las bujías incluso los inyectores.

The spark plugs were dirty and badly calibrated and I mention that the fuel here in the country is not very good and damages or fouls very fast the spark plugs and even the injectors.

Lo primero que hice fue limpiar las bujías un una mopa.

The first thing I did was to clean the spark plugs with a mop.

De esa manera fui limpiado una por una hasta que las cuatro bujías quedaron bien limpias.

I cleaned them one by one until all four spark plugs were clean.

Tan aproveche de darle una calibración a cada una.

So take the opportunity to give each one a calibration.

IMG_20211124_160541_1.jpg

IMG_20211124_160407.jpg

IMG_20211124_160341_1.jpg

Les di una calibración de 0.45 para que el electrodo de la maza estuviera un poco más alejado del electrodo principal.

I gave them a calibration of 0.45 so that the club electrode was a little further away from the main electrode.

IMG_20211125_001830.jpg

Ya una ves teniendo las bujías limpias y calibradas procedo a montarlas.

Once the spark plugs have been cleaned and calibrated, I proceed to mount them.

IMG_20211124_155324_1.jpg

IMG_20211124_155255_1.jpg

Utilice un dado 5⅝ cuadrante ½ , dos estenciones cuadrante ½ y la palanca cuadrante ½.

Use a 5⅝ ½ quadrant die, two ½ quadrant stencils and ½ quadrant lever.

Así quedó la Mazda bt 50 después del mantenimiento de las bujías.

This is how the Mazda bt 50 looked after spark plug maintenance.

Gracias a Dios se le puedo solucionar al cliente y quedó satisfecho, espero les guste amigos de hive motor.

Thank God I can solve the customer and he was satisfied, I hope you like it friends of hive motor.
H2
H3
H4
3 columns
2 columns
1 column
Join the conversation now
Logo
Center