#steemmakers

Hello, steemians! Welcome to my page, eh! As my regular readers know, I've been working on getting a couple of wood crates cleaned up and painted to use for some storage shelves. In this post I'll show

Hello, steemians! Welcome to my page, eh! This post is for part 2 of my series on using some wood crates to make some storage shelves. This video talks about painting the wood crates with a primer paint

Hello, steemians! Welcome to my page, eh! I started a new project out in the greenhouse this week. I bought a couple of wood crates from the local big box stores to use to stack to make some storage shelves

So I recently got into 3D printing and I will be sharing my experiences on steemit, and so I bring to you my first 3d printing related post and I think this old School steemit logo automata is a good start.

The following is the newest installment of my decade old practice of taking lots of special pictures of special cars when I see them out in the wild. This immaculate and seemingly brand new 911 GT2 RS

Back when the 330i was released BMW had somewhat of a problem as in the stock brake discs and calipers were too big for the regular 15" steel rims to give them enough room. So BMW being as crazy as

On the road to 400.000km This is my 1999 BMW 320i E46, built in March of that year in Bavaria. Above you see it in some snow with the signature 17" steelies that BMW made for the 330i as a steel rim

On the road to 400.000km This is my 1999 BMW E46 which will crack the 20 years of age this year in March. I haven't blogged about it in 6 months now so I figured it's time for an update. The Airbag Lamp

Recently I had the problem that I wanted to have Tails as a second operating system always with me. But I didn't want to carry a USB stick with me and a permanent hard drive installation is not intended

Hey Steemers!! Just a heads up! I made a new bow Nd I'll be walking you through some of the process and the outcome! Stay tuned tomorrow for a new build along!! Here's what I'll be showing you...

Hello my Fellow Steemians Today I worked on additions to the onboard water generation system. I started by drilling several holes to create a 3" diameter hole right next to the dehumidifier so the

Designing a CNC Mill side stop

Restoring a child seat

Hello beautiful Humans! Today I wanted to show a walkthrough for my bathroom restoration project and give some of my lessons learned from the project. This project started with the demolition of the existing

Hello my fellow Steemians! Sorry its taken me a while to create a proper post, but I've finally got to a point where I can get back to my primary focus which is on the trailer project. Today I worked to

Hello, Hello ... It is a great honor for me to greet you and be here again with you, unfortunately I moved away a few months since I did not have materials for the tutorials, but today I come to stay with

Hello my fellow steemians! Today I am providing the documentation of building an extension plug for the Sol-Ark system that will allow a 3kW generator set to top off the trailer battery bank in times of

Worked to create the proper plug for the Surthrival trailer with a write up to follow.

A while ago I made a photo tutorial on how to make a tree of life pendant with wire and crystal ships. The same technique can be applied to larger wall decor pieces. In this post I will show you how I

[DIY] Raspberry PI Projekt - Die "Pandora Station" [TAG 9] [Update] - (fast)Fertigstellung ! Die Historie des Projektes findet ihr nochmal zum nachlesen. Tag 1 - Vorstellung Tag2 - Erste Schritte